| LaserDisc Database https://forum.lddb.com/ |
|
| [CLD-R7G] U1 error code https://forum.lddb.com/viewtopic.php?f=53&t=11055 |
Page 1 of 1 |
| Author: | kaelef [ 05 Oct 2023, 19:58 ] |
| Post subject: | [CLD-R7G] U1 error code |
I have a CLD-R7G that I use very infrequently. I just plugged it in today after not using it for a couple of years and am getting a "U-1" code when loading a disc. It seems to get past it if I try loading side B instead of the default side A, or if I try it multiple times. It seems to play fine once it does get past the loading phase. Any recommendations on what I should check? Might it be as simple as a belt replacement? |
|
| Author: | admin [ 06 Oct 2023, 03:27 ] |
| Post subject: | Re: [CLD-R7G] U1 error code |
Here: => [IMPORTANT] List of Pioneer Error Codes I would check the belts first, they might have aged and become loose/slippery. Bad |
|
| Author: | rein-o [ 06 Oct 2023, 20:54 ] |
| Post subject: | Re: [CLD-R7G] U1 error code |
That player has a good grip ring material, I would check if its dirty and making discs slip. |
|
| Author: | kaelef [ 06 Oct 2023, 21:07 ] |
| Post subject: | Re: [CLD-R7G] U1 error code |
Thanks for the tips. The problem seemed to go away after playing a few discs, so I think it's probably dust or something that collected in there while it wasn't in use. I'll open it up and take a look around soon. |
|
| Author: | rein-o [ 06 Oct 2023, 21:09 ] |
| Post subject: | Re: [CLD-R7G] U1 error code |
Yeah, just use some cleaner, no alcohol. That player is pretty easy to open, I think its just 4 screws after the top is off and that pad should be white. Its a material that should never need to be replaced, I had one and it was a great player. |
|
| Author: | kaelef [ 06 Oct 2023, 21:14 ] |
| Post subject: | Re: [CLD-R7G] U1 error code |
Awesome. Thanks again for the insight! |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|