Just wanted to report back here... For anyone that might review this, that the belt replacement was the only problem and we now how a working laserdisc player!
| LaserDisc Database https://forum.lddb.com/ |
|
| [CLD-V850] Laserdisc not spinning and then it ejects https://forum.lddb.com/viewtopic.php?f=53&t=11105 |
Page 1 of 1 |
| Author: | haldog [ 03 Nov 2023, 22:36 ] |
| Post subject: | [CLD-V850] Laserdisc not spinning and then it ejects |
Hi Laserdisc brain trust! I am hoping you can help me with next steps. Just acquired a Pioneer CLD-V850 and I was hopeful it would work, because it powers up fine and it opens and ejects the trays for both LD and CD without issue... Alas, when I insert either a CD or an LD, the drawer closes, there is some humming sounds and then it ejects 10 seconds later. No error appears on the display, it just says "OPEN" and ejects the discs. After opening it up to inspect it, it seems like it is taking the disc, the laser is moving properly underneath the disc, it raises the disc, but there there is a humming sound after which it drops down the disc and ejects it. If the drawer was not working, I would just replace the belt right away, but this appears to be something else. Here is a video of a CD loading, if anyone is willing to take a quick look and recommend next steps. I would be very grateful! https://youtube.com/shorts/SdmNIvVwdlI |
|
| Author: | grasshopper [ 04 Nov 2023, 02:26 ] |
| Post subject: | Re: Laserdisc not spinning and then it ejects |
It's the loader Belt. When it It's stuck and hums on your video just lift gently the mech. Up! Then it should complete and see your disc! The mech is stuck, you need to lift it when it hums so it can complete. |
|
| Author: | haldog [ 04 Nov 2023, 02:29 ] |
| Post subject: | Re: Laserdisc not spinning and then it ejects |
grasshopper wrote: It's the loader Belt. When it It's stuck and hums on your video just lift gently the mech. Up! Then it should complete and see your disc! Thanks Grasshopper! Any recommendations on how to source the belt? Is any listing on ebay ok? |
|
| Author: | grasshopper [ 04 Nov 2023, 02:32 ] |
| Post subject: | Re: Laserdisc not spinning and then it ejects |
Should be belts listed on ebay. Type 704 pioneer belt. Did, you see if it played a disc ok? |
|
| Author: | haldog [ 04 Nov 2023, 17:21 ] |
| Post subject: | Re: [CLD-V850] Laserdisc not spinning and then it ejects |
It does not play either a CD or an LD. It fails to spin up the disc and just ejects it. |
|
| Author: | ldfan [ 04 Nov 2023, 23:33 ] |
| Post subject: | Re: [CLD-V850] Laserdisc not spinning and then it ejects |
As grasshopper said, you need a new loading belt as the old one it too stretched to not only move the tray but to ensure a tight grip when the belt lifts the transport up to the clamper. Here is the belt you need.... https://www.ebay.com/itm/175730011496 |
|
| Author: | haldog [ 05 Nov 2023, 17:54 ] |
| Post subject: | Re: [CLD-V850] Laserdisc not spinning and then it ejects |
Thanks... I have the belt ordered. I hope it's this simple. I will report back here whether it is working. |
|
| Author: | ldfan [ 06 Nov 2023, 07:43 ] |
| Post subject: | Re: [CLD-V850] Laserdisc not spinning and then it ejects |
A stretched loading belt will cause all sorts of issues in an LD player since it’s not just used for loading. Here is something I wrote up awhile back on changing it (if you were not sure of how to do it). Your player is the same chassis as this one..... ldfan @ [CLD-D704] Loading Issues |
|
| Author: | haldog [ 10 Nov 2023, 19:59 ] |
| Post subject: | Re: [CLD-V850] Laserdisc not spinning and then it ejects |
Just wanted to report back here... For anyone that might review this, that the belt replacement was the only problem and we now how a working laserdisc player! |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|