[CLD-D503] Looking for M-Holder

queenv · Posted: 26 Feb 2024, 13:14

It is the plastic assembly that houses the motor and has the drive gears to move the laser assembly. It attaches directly behind and to the laser assembly.

admin · Posted: 26 Feb 2024, 13:33

queenv wrote:

It is the plastic assembly that houses the motor and has the drive gears to move the laser assembly. It attaches directly behind and to the laser assembly.

A picture and the exact part number would be nice so that someone finding this topic in the future knows what to look for.

Julien

ldfan · Posted: 26 Feb 2024, 20:40

Part number is VNL1584. Pretty easy to find in the service manual......

Not a common part that breaks unlike the Epsilon Turn version.

queenv · Posted: 27 Feb 2024, 02:01

ldfan, thank you so much. That is exactly it. I just need to find one.

krbahr · Posted: 27 Feb 2024, 04:51

As I mentioned before I should have the complete gear assembly, if you are interested contact me via Private Message

chrisw6atv · Posted: 02 Mar 2024, 09:04

ldfan wrote:

chrisw6atv wrote:

As ldfan mentioned, look for issues with either or both trays such as dirt or dried grease in the gear "tracks",…

I don’t recall saying anything about this :shifty:

. Maybe it was part of a discussion regarding the CLD-3070 but this issue is essentially different.

I had simply meant that you commented on the tray issue first, in the second post of this discussion.

chrisw6atv · Posted: 02 Mar 2024, 09:09

queenv wrote:

Unfortunately, that is the wrong M Holder for my machine.

I apologize for the confusion. I am glad that you talked to Ethan and got the help you needed here. I was not aware that other parts such as what you need were also called M-holders, my mistake.

[CLD-D503] Looking for M-Holder

Who is online