LaserDisc Database https://forum.lddb.com/ |
|
[CLD-D503] Looking for M-Holder https://forum.lddb.com/viewtopic.php?f=53&t=11233 |
Page 2 of 2 |
Author: | queenv [ 26 Feb 2024, 13:14 ] |
Post subject: | Re: [CLD-D503] Looking for M-Holder |
It is the plastic assembly that houses the motor and has the drive gears to move the laser assembly. It attaches directly behind and to the laser assembly. |
Author: | admin [ 26 Feb 2024, 13:33 ] |
Post subject: | Re: [CLD-D503] Looking for M-Holder |
queenv wrote: It is the plastic assembly that houses the motor and has the drive gears to move the laser assembly. It attaches directly behind and to the laser assembly. A picture and the exact part number would be nice so that someone finding this topic in the future knows what to look for. Julien |
Author: | ldfan [ 26 Feb 2024, 20:40 ] |
Post subject: | Re: [CLD-D503] Looking for M-Holder |
Part number is VNL1584. Pretty easy to find in the service manual...... Not a common part that breaks unlike the Epsilon Turn version. |
Author: | queenv [ 27 Feb 2024, 02:01 ] |
Post subject: | Re: [CLD-D503] Looking for M-Holder |
ldfan, thank you so much. That is exactly it. I just need to find one. |
Author: | krbahr [ 27 Feb 2024, 04:51 ] |
Post subject: | Re: [CLD-D503] Looking for M-Holder |
As I mentioned before I should have the complete gear assembly, if you are interested contact me via Private Message |
Author: | chrisw6atv [ 02 Mar 2024, 09:04 ] |
Post subject: | Re: Looking for M Holder. Pioneer CLD-D503 |
ldfan wrote: chrisw6atv wrote: As ldfan mentioned, look for issues with either or both trays such as dirt or dried grease in the gear "tracks",… I don’t recall saying anything about this . Maybe it was part of a discussion regarding the CLD-3070 but this issue is essentially different. I had simply meant that you commented on the tray issue first, in the second post of this discussion. |
Author: | chrisw6atv [ 02 Mar 2024, 09:09 ] |
Post subject: | Re: Looking for M Holder. Pioneer CLD-D503 |
queenv wrote: Unfortunately, that is the wrong M Holder for my machine. I apologize for the confusion. I am glad that you talked to Ethan and got the help you needed here. I was not aware that other parts such as what you need were also called M-holders, my mistake. |
Page 2 of 2 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |