| LaserDisc Database https://forum.lddb.com/ |
|
| [CLD-V2800] What Arc Suppressor or TVS Diode Do I Need https://forum.lddb.com/viewtopic.php?f=53&t=11436 |
Page 1 of 1 |
| Author: | the_old_timer98 [ 23 Jul 2024, 05:26 ] |
| Post subject: | [CLD-V2800] What Arc Suppressor or TVS Diode Do I Need |
Hello, I have a Pioneer CLD-V2800 that has worked great for years. Back in May or June I discovered that it would no longer turn on. I have since cut out the Arc Suppressor/TVS diode, replaced the fuse, and it's working again. However, even though it's working, I'm still a little worried about not having the Arc Suppressor. I'm very much not knowledgeable in this area, and the answers I'm seeing vary wildly from "it's not a problem, just use a good power strip with surge protection" to "you're going to fry the components and potentially start a fire". I'd rather air on the side of caution. The Arc Suppressor/TVS diode in mine is model K1V403. I have a friend/coworker who knows how to solder, and is willing to do this for me if I have the replacement part. If anyone has an Amazon/EBay/etc. link to a compatible part, preferably one better than the one it came with as I've read Pioneer kinda cheaped out on that part, it would be very much appreciated. Thanks, |
|
| Author: | rein-o [ 23 Jul 2024, 16:10 ] |
| Post subject: | Re: [CLD-V2800] What Arc Suppressor or TVS Diode Do I Need |
Do some searching to find out, I'm no tech so I'm giving my advice free of charge. 1st I would check mouser to see if they have the part you need, its not super easy to use but they have a lot of parts for all electronics. 2, there is another player where they clip the arc suppressor and it works fine, so I doubt there will be an issue if those don't have issues. 3, power strip, I would just plug it into the power strip and turn it off at the strip when not in use. ?is there is a possibility it will start a fire if you run it while you are away. Turn the strip off so no power. |
|
| Author: | krbahr [ 25 Jul 2024, 03:04 ] |
| Post subject: | Re: [CLD-V2800] What Arc Suppressor or TVS Diode Do I Need |
The reason power strips cause fires is due to people plugging way to many things into it that overdraw the amperage the strip is designed for. Just get a Multi Power Strip with surge suppression or a single outlet surge suppressor and it is a better protector than the cheap design Pioneer used in the LD players. The CLD-Dxxx and DVL-xxx machines use a K1V24 and the next higher rated part is the K1V26. I do not know what a K1V403 is rated at. |
|
| Author: | the_old_timer98 [ 03 Aug 2024, 22:55 ] |
| Post subject: | Re: [CLD-V2800] What Arc Suppressor or TVS Diode Do I Need |
Thanks for the replies! I went to Lowe's and bough this power strip rated at 2100 joules of protection (link below). I had done some looking online, including on Mouser, but I couldn't find K1V403 or something labeled as a suitable replacement. I've seen in other forum threads the recommendation to replace a K1V24 or K1V26 with a P6KE350. Though since I've been reassured that using a power strip with surge protection is just as good or better, I may just forget about trying to replace the part. Thanks again guys, and apologies for the late response, I had forgotten my password. https://www.lowes.com/pd/Utilitech-5-Ou ... 5014528935 |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|