LaserDisc Database
http://forum.lddb.com/

[CLD-D703/4] Remote fix? CU-CLD098 stuck on one command . .
http://forum.lddb.com/viewtopic.php?f=53&t=11468
Page 1 of 1

Author:  pmjones [ 23 Aug 2024, 02:56 ]
Post subject:  [CLD-D703/4] Remote fix? CU-CLD098 stuck on one command . .

Like the title says, interested in fixing a remote that appears to be stuck on sending a chapter search command to the player. None of the other remote buttons are functional. This seemingly happened overnight.

Help! Does anyone on these forums fix remotes?

Thanks . . .

Author:  krbahr [ 23 Aug 2024, 03:08 ]
Post subject:  Re: [CLD-D703/4] Remote fix? CU-CLD098 stuck on one command

Open the remote, separate the keypad from the circuit board, clean each, and re-assemble

Author:  pmjones [ 23 Aug 2024, 03:10 ]
Post subject:  Re: [CLD-D703/4] Remote fix? CU-CLD098 stuck on one command

krbahr wrote:
Open the remote, separate the keypad from the circuit board, clean each, and re-assemble


Thanks - pulled both screws but having a heck of a time getting this thing open . . .

Author:  lons_vex [ 23 Aug 2024, 08:44 ]
Post subject:  Re: [CLD-D703/4] Remote fix? CU-CLD098 stuck on one command

Don't know about this specific remote, but the Pioneer remote for my Plasma is also glued.
So even if you remove the screws it wont just open like that.
Also check carefully if there might be an additional screw below a sticker or something.
Good luck!

Author:  krbahr [ 23 Aug 2024, 20:54 ]
Post subject:  Re: [CLD-D703/4] Remote fix? CU-CLD098 stuck on one command

It’s not screwed but it has good latch tabs, you just have to start somewhere and get something like a flat screwdriver and twist it to get the separation started then the reminder is easier.

Author:  rein-o [ 23 Aug 2024, 21:10 ]
Post subject:  Re: [CLD-D703/4] Remote fix? CU-CLD098 stuck on one command

Cheese Dip always helps.

Author:  pmjones [ 24 Aug 2024, 01:19 ]
Post subject:  Re: [CLD-D703/4] Remote fix? CU-CLD098 stuck on one command

rein-o wrote:
Cheese Dip always helps.


lol

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/