It is currently 05 Dec 2024, 11:05




 Page 1 of 1 [ 6 posts ] 
Author Message
 Post subject: [CLD-7RG] Very damaged in shipping, trying to fix E0 error
PostPosted: 01 Oct 2024, 08:39 
Shows curiousity
Shows curiousity
User avatar

Joined: 01 Dec 2023, 16:30
Posts: 23
Location: United Kingdom
Has thanked: 0 time
Been thanked: 5 times
Hello. I had received my CLD-7RG from Japan and it was packaged abysmally so got quite damaged. I have already got my money back for it all, but they haven't asked for it back. So now I've got a broken CLD-7RG.

The first issue was that it wouldn't turn on. The PS board had a massive crack down it, which I've managed to repair so it now turns on. When turning on nothing moves but it displays an E0 error, which I'm a bit unsure where to start with. Could it be that parts are not lined up? or a loose connection? I can see the laser moving slightly when turning on, but there is no motor sounds at all. There is a part that has snapped off that may be related to the issue:

Image

I also noticed this metal tab coming out of the front of the machine if that's an issue:

Image

And here are some pictures of the PS board and the rest of the machine:

Image
Image

Would really love if anyone has any suggestions on this.
Offline
 Profile  
 
 Post subject: Re: [CLD-7RG] Very damaged in shipping, trying to fix EO err
PostPosted: 01 Oct 2024, 15:01 
Jedi Knight
Jedi Knight
User avatar

Joined: 14 Jan 2010, 09:44
Posts: 6178
Location: Ann Arbor
Has thanked: 1462 times
Been thanked: 1250 times
I think you should have to eat that player for what you did to it.

I don’t have any other suggestions.
_________________
All about LD care, inner sleeves, shrink wrap, etc.

https://youtu.be/b3O-vHpHRpM
Offline
 Profile  
 
 Post subject: Re: [CLD-7RG] Very damaged in shipping, trying to fix E0 err
PostPosted: 01 Oct 2024, 15:56 
Site Admin
Site Admin
User avatar

Joined: 07 Aug 2002, 23:37
Posts: 4753
Location: Tokyo
Has thanked: 323 times
Been thanked: 1284 times
Error codes are here => [IMPORTANT] List of Pioneer Error Codes

E0 is slider issue, probably it doesn't move at all or doesn't reach it's target position:

  • The slider mechanism is mechanically locked and can no longer move to its target

Is the slider moving at all?

Julien
_________________
HARDWARE DATABASE
HLD-X0/9 LD-S9 OPPO 105/205 SL-1200G
LDD-1 MSC-4000 R2144 PONTUS II C45 MC257
Offline
 Profile  
 
 Post subject: Re: [CLD-7RG] Very damaged in shipping, trying to fix E0 err
PostPosted: 01 Oct 2024, 16:45 
Shows curiousity
Shows curiousity
User avatar

Joined: 01 Dec 2023, 16:30
Posts: 23
Location: United Kingdom
Has thanked: 0 time
Been thanked: 5 times
admin wrote:
Error codes are here => [IMPORTANT] List of Pioneer Error Codes

E0 is slider issue, probably it doesn't move at all or doesn't reach it's target position:

  • The slider mechanism is mechanically locked and can no longer move to its target

Is the slider moving at all?

Julien



I've managed to get it to move now by putting that piece of plastic that snapped off back onto the laser assembly. So it turns on now and you can hear it begins to move but then to starts to sound like it's stuck. And the eject button doesn't seem to do anything.
Offline
 Profile  
 
 Post subject: Re: [CLD-7RG] Very damaged in shipping, trying to fix E0 err
PostPosted: 01 Oct 2024, 18:51 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 8220
Location: Dullaware
Has thanked: 1324 times
Been thanked: 919 times
First this is an R7G correct?

Good thing is that these are easier to fix, adjusting laser still needs a scope but can be done without if you know what you're doing.

Bad thing is there are no new parts, get out the JB Weld :lol:

You got it for free, I really doubt you will ever get this working 50%, just keep it for parts and buy another one to get damaged in shipping.
Offline
 Profile  
 
 Post subject: Re: [CLD-7RG] Very damaged in shipping, trying to fix E0 err
PostPosted: 07 Oct 2024, 03:42 
Absolute fan
Absolute fan
User avatar

Joined: 10 May 2007, 03:12
Posts: 1558
Location: United States
Has thanked: 0 time
Been thanked: 361 times
This unit has the Mholder breaking issues too, you need to check if the pins holding the movements gears are broke and the gears are floating up and down.
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 6 posts ] 


Who is online

Users browsing this forum: nextwednesday and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: