It is currently 05 Dec 2024, 10:08




 Page 1 of 1 [ 4 posts ] 
Author Message
 Post subject: CLD-99 sounds rough when it flips & sometimes does not flip
PostPosted: 16 Oct 2024, 08:42 
True fan
True fan
User avatar

Joined: 06 Jan 2020, 18:00
Posts: 460
Location: United States
Has thanked: 414 times
Been thanked: 50 times
Sometimes does not flip to side B. Is it time for a belt change or should I just open it up and clean it up a bit and put back together again and hope it works like I've done in the past. I've probably was able to play 50 or something movies before it messed up again. And this time it was probably my fault because i stopped it near the end of side B and this is when it started malfunctioning again. :thumbdown:
_________________
CLD-99, CLD-3080, CLD-53, and LX-900
Offline
 Profile  
 
 Post subject: Re: CLD-99 sounds rough when it flips & sometimes does not f
PostPosted: 16 Oct 2024, 09:55 
Hardcore fan
Hardcore fan
User avatar

Joined: 28 Jun 2014, 05:59
Posts: 1508
Location: San Francisco, CA USA
Has thanked: 448 times
Been thanked: 556 times
If the belt has never been changed, it’s due for one.

Stop constantly cleaning what doesn’t need cleaning and do it right for a change (we’ve discussed this before).


Last edited by ldfan on 16 Oct 2024, 10:08, edited 1 time in total.
Offline
 Profile  
 
 Post subject: Re: CLD-99 sounds rough when it flips & sometimes does not f
PostPosted: 16 Oct 2024, 10:08 
True fan
True fan
User avatar

Joined: 06 Jan 2020, 18:00
Posts: 460
Location: United States
Has thanked: 414 times
Been thanked: 50 times
Just cleaned the spindle carefully without overdoing it and it's back to working. I'm not sure if that has anything to do with it or not. Well, I'm assuming something like that was making it sound rough noise wise. Now it sounds good. All I have to do now is put the Wooden Panels back on it. I also carefully touched up what I think the belt is but if it is the belt someone probably replaced it already because it's grey looking and not a black belt unless this is something else. When I messed it up earlier I stopped it instead of letting the player finish the stop at the side of B. Something I did caused it to react negatively which started giving me P0 or PO errors.
_________________
CLD-99, CLD-3080, CLD-53, and LX-900
Offline
 Profile  
 
 Post subject: Re: CLD-99 sounds rough when it flips & sometimes does not f
PostPosted: 16 Oct 2024, 10:11 
Hardcore fan
Hardcore fan
User avatar

Joined: 28 Jun 2014, 05:59
Posts: 1508
Location: San Francisco, CA USA
Has thanked: 448 times
Been thanked: 556 times
You most likely accelerated the loss of rubber from the grip ring on your spindle so I would consider replacing that too.
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 4 posts ] 


Who is online

Users browsing this forum: lons_vex and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: