LaserDisc Database https://forum.lddb.com/ |
|
[CLD-D925] U1 error https://forum.lddb.com/viewtopic.php?f=53&t=7632 |
Page 1 of 1 |
Author: | laszlo [ 16 Feb 2018, 14:14 ] |
Post subject: | [CLD-D925] U1 error |
Dear forum I would like to fix my "U1" problem with my d 925. Can you please tell me where I can buy the correct load belt for the D925? And thanks for the inspiration!!! LV-CDV-LD collector since 1988. regards from Denmark |
Author: | robinrobin [ 16 Feb 2018, 14:40 ] |
Post subject: | Re: U1 error CLD D925 |
Hi, I got mine from ebay. Worked like a charm. https://m.ebay.nl/itm/Riemen-fur-PIONEER-CD-CDV-LD-CLD-D515-CLD-D925-LaserDisc-Player-Recorder-Belt/273064193908?hash=item3f93e4ef74:g:C9cAAOSw5cNYHcLG |
Author: | laszlo [ 16 Feb 2018, 15:02 ] |
Post subject: | Re: U1 error CLD D925 |
Thank you very much ROBINROBIN Have ordered. Was it difficult to change the belt? And is there any other repair I should do when it's opened? regards Laszlo |
Author: | robinrobin [ 16 Feb 2018, 15:17 ] |
Post subject: | Re: [CLD-D925] U1 error |
That's great to hear. Take the top off, then pull out the disc tray and replace the belt. Just take it easy and your done in 15-30 min. |
Author: | robinrobin [ 16 Feb 2018, 15:22 ] |
Post subject: | Re: [CLD-D925] U1 error |
Also take off the front panel. |
Author: | sjoerg [ 16 Feb 2018, 15:29 ] |
Post subject: | Re: [CLD-D925] U1 error |
robinrobin wrote: Also take off the front panel. There is no reason to do this, you only need to remove the tray to change the belt. |
Author: | laszlo [ 16 Feb 2018, 15:33 ] |
Post subject: | Re: [CLD-D925] U1 error |
Super thanks. Looking forward to playing the discs again. Update will follow |
Author: | laszlo [ 28 Feb 2018, 09:54 ] |
Post subject: | Re: [CLD-D925] U1 error |
Hi As promised. Replacement is performed without problems. The new belt is a bit smaller and I do not know if it is due to the age of the old one. Off with the top, out with the plate drawer, replace the old belt. |
Author: | laszlo [ 28 Feb 2018, 09:56 ] | ||
Post subject: | Re: [CLD-D925] U1 error | ||
1.
|
Author: | laszlo [ 28 Feb 2018, 09:57 ] | ||
Post subject: | Re: [CLD-D925] U1 error | ||
2.
|
Author: | laszlo [ 28 Feb 2018, 09:58 ] | ||
Post subject: | Re: [CLD-D925] U1 error | ||
3.
|
Author: | laszlo [ 28 Feb 2018, 09:58 ] | ||
Post subject: | Re: [CLD-D925] U1 error | ||
4.
|
Author: | laszlo [ 28 Feb 2018, 09:58 ] | ||
Post subject: | Re: [CLD-D925] U1 error | ||
5.
|
Author: | laszlo [ 28 Feb 2018, 09:59 ] | ||
Post subject: | Re: [CLD-D925] U1 error | ||
Did the same on the 515. All 4 is full working
|
Author: | admin [ 07 Mar 2018, 06:21 ] |
Post subject: | Re: [CLD-D925] U1 error |
laszlo wrote: I would like to fix my "U1" problem with my d 925. That would be a good use for the Pioneer Error Code Topic: [GLOBAL] List of Pioneer Error Codes U1 is supposed to be "Miss clamp error", did replacing the belt actually fixed it? Then we could add one item to the "Probably causes" section. Julien |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |