Just like here from the Pioneer CLD-95 manual.
| Attachments: |
|
CLD-95.jpg [ 259.56 KiB | Viewed 2657 times ] |
| LaserDisc Database https://forum.lddb.com/ |
|
| [CLD-95] The tray will not open https://forum.lddb.com/viewtopic.php?f=53&t=8918 |
Page 1 of 1 |
| Author: | gregnow [ 05 Mar 2020, 00:41 ] |
| Post subject: | [CLD-95] The tray will not open |
Hello I recently purchased a CLD95- after switching on it makes a constant noise and after switching the open tray button it tries to open up but fails with silence or sometimes with even louder noise I would like to ask what causes the problem and if there is any chance to repair it? Thanks |
|
| Author: | cplusplus [ 05 Mar 2020, 01:37 ] |
| Post subject: | Re: CLD-95 - the tray will not open |
More than likely you just need to replace the belts. |
|
| Author: | krbahr [ 05 Mar 2020, 04:25 ] |
| Post subject: | Re: CLD-95 - the tray will not open |
If not packed properly and the unit experiences a hard vertical jolt the mounting tabs for the loading mechanism can break and it drops and this can happen. This is also a possibility. |
|
| Author: | gregnow [ 05 Mar 2020, 21:34 ] |
| Post subject: | Re: [CLD-95] The tray will not open |
Thank you I will try to locate the belts- a guy in Italy offers the replacement synchro belt on eBay eBay item number:172618739572 but the other one SCQ4. 3 is only available in the U.S. I think. Will check the tabs too. |
|
| Author: | krbahr [ 05 Mar 2020, 23:38 ] |
| Post subject: | Re: [CLD-95] The tray will not open |
You have to get the tray out to see the belts or to be able remove the front to see them. |
|
| Author: | gregnow [ 23 Jan 2021, 15:56 ] |
| Post subject: | Re: [CLD-95] The tray will not open |
To get it going I still need the thing VNL1253 SLGEAR (E) in laser module Mine has some teeth broken and this causes the problem.Is there anywhere to find a spare? Thanks very much in advance. |
|
| Author: | gregnow [ 23 Jan 2021, 16:52 ] | ||
| Post subject: | Re: [CLD-95] The tray will not open | ||
Just like here from the Pioneer CLD-95 manual.
|
|||
| Author: | cplusplus [ 23 Jan 2021, 19:04 ] |
| Post subject: | Re: [CLD-95] The tray will not open |
I don't know of anywhere you can buy just that gear. Supposedly https://instrumentalparts.com/gear-vnl1253/ has it, but I doubt it. You will likely need to find someone that has a dead carriage assembly VWT1054 you can buy and pull the gear from. Other option is 3D printing. |
|
| Author: | ldfan [ 23 Jan 2021, 20:27 ] |
| Post subject: | Re: [CLD-95] The tray will not open |
I’m going to attempt this idea to fix a busted gear on a Sony LD player. https://www.instructables.com/Broken-Gear-Repair/ Not sure if will work but no harm in trying. |
|
| Author: | cplusplus [ 23 Jan 2021, 20:53 ] |
| Post subject: | Re: [CLD-95] The tray will not open |
ldfan wrote: Not sure if will work but no harm in trying. I would if I wasn't awful at stuff like that. |
|
| Author: | gregnow [ 23 Jan 2021, 23:46 ] |
| Post subject: | Re: [CLD-95] The tray will not open |
Thanks a lot guys - I keep my fingers crossed they get it for me - last time it took them 4 weeks to supply the VEB1069 sqare belt but its with me. https://north.pl/karta/vnl1253-zahnrad- ... -1923.html Is it very tough to replace the broken gear with the new one- any clues? Thanks! |
|
| Author: | krbahr [ 24 Jan 2021, 02:01 ] |
| Post subject: | Re: [CLD-95] The tray will not open |
See if you can find a CLD-2080 or 3080 as they have the same pickup. |
|
| Author: | gregnow [ 24 Jan 2021, 12:49 ] |
| Post subject: | Re: [CLD-95] The tray will not open |
I understand getting a new pićkup requires further adjustment? How about the change of just the gear which I hope to receive. Does it stil require the adjustment? I do not have a test disc and so on. |
|
| Author: | cplusplus [ 24 Jan 2021, 18:50 ] |
| Post subject: | Re: [CLD-95] The tray will not open |
gregnow wrote: I understand getting a new pićkup requires further adjustment? How about the change of just the gear which I hope to receive. Does it stil require the adjustment? I do not have a test disc and so on. Yes if you swap entire pickup, you will need to make adjustments. You might have to also adjust Side B centering if you remove the top metal plate (screws usually have yellow locking compound on them). That is why it would be best to just replace the gear. |
|
| Author: | gregnow [ 24 Jan 2021, 18:55 ] |
| Post subject: | Re: [CLD-95] The tray will not open |
Thanks a lot I am back when the gear arrives 
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|