It is currently 17 May 2021, 21:16




 Page 1 of 1 [ 8 posts ] 
Author Message
 Post subject: [CLD-D501][CLD-D502][CLD-D701][CLD-D702] Clamper Disassembly
PostPosted: 04 May 2020, 18:27 
Hardcore fan
Hardcore fan
User avatar

Joined: 13 Aug 2018, 03:18
Posts: 1045
Has thanked: 277 times
Been thanked: 306 times
The CLD-Dx01, CLD-Dx02 can have eject problems ranging from not being able to eject at all to struggling to eject. I believe this might also be applicable to the CLD-2090/3090.

If the belt looks good, it it is probably the grease Pioneer used that has turned into sticky, dark orange goop. To properly resolve this, the clamper needs to be removed, cleaned, and then white lithium grease applied to where the old grease was. The rest of the loading mechanism can benefit from this as well (particularly the slide cam, but I do not have photos of that).

1. Remove the two screws (already removed in this photo) and retaining clip.


Attachments:
Clamper_Disassembly_1.jpg
Clamper_Disassembly_1.jpg [ 474.66 KiB | Viewed 480 times ]
Offline
 Profile  
 
 Post subject: Re: [CLD-D501][CLD-D502][CLD-D701][CLD-D702] Clamper Disasse
PostPosted: 04 May 2020, 18:28 
Hardcore fan
Hardcore fan
User avatar

Joined: 13 Aug 2018, 03:18
Posts: 1045
Has thanked: 277 times
Been thanked: 306 times
2. Remove this assembly. It consists of 3 distinct pieces.


Attachments:
Clamper_Disassembly_2.jpg
Clamper_Disassembly_2.jpg [ 398.37 KiB | Viewed 479 times ]
Offline
 Profile  
 
 Post subject: Re: [CLD-D501][CLD-D502][CLD-D701][CLD-D702] Clamper Disasse
PostPosted: 04 May 2020, 18:28 
Hardcore fan
Hardcore fan
User avatar

Joined: 13 Aug 2018, 03:18
Posts: 1045
Has thanked: 277 times
Been thanked: 306 times
3. Extend the clamper enough to expose the screws on each side under the white plastic clamp cams and then unscrew them.


Attachments:
Clamper_Disassembly_3.jpg
Clamper_Disassembly_3.jpg [ 326.85 KiB | Viewed 479 times ]
Offline
 Profile  
 
 Post subject: Re: [CLD-D501][CLD-D502][CLD-D701][CLD-D702] Clamper Disasse
PostPosted: 04 May 2020, 18:29 
Hardcore fan
Hardcore fan
User avatar

Joined: 13 Aug 2018, 03:18
Posts: 1045
Has thanked: 277 times
Been thanked: 306 times
4. Retract the clamper and remove the clamp cams for each side.


Attachments:
Clamper_Disassembly_4.jpg
Clamper_Disassembly_4.jpg [ 240.07 KiB | Viewed 479 times ]
Offline
 Profile  
 
 Post subject: Re: [CLD-D501][CLD-D502][CLD-D701][CLD-D702] Clamper Disasse
PostPosted: 04 May 2020, 18:29 
Hardcore fan
Hardcore fan
User avatar

Joined: 13 Aug 2018, 03:18
Posts: 1045
Has thanked: 277 times
Been thanked: 306 times
5. Remove the ends of the clamp lever that were held in place with screws. Now remove the other clamp lever by sliding it up.


Attachments:
Clamper_Disassembly_5.jpg
Clamper_Disassembly_5.jpg [ 247.66 KiB | Viewed 479 times ]
Offline
 Profile  
 
 Post subject: Re: [CLD-D501][CLD-D502][CLD-D701][CLD-D702] Clamper Disasse
PostPosted: 16 Apr 2021, 12:05 
First post
First post
User avatar

Joined: 14 Apr 2021, 11:49
Posts: 1
Location: United States
Has thanked: 0 time
Been thanked: 0 time
Quote:
The CLD-Dx01, CLD-Dx02 can have eject problems ranging from not being able to eject at all to struggling to eject. I believe this might also be applicable to the CLD-2090/3090.

If the belt looks good, it it is probably the grease Pioneer used that has turned into sticky, dark orange goop. To properly resolve this, the clamper needs to be removed, cleaned, and then white lithium grease applied to where the old grease was. The rest of the loading mechanism can benefit from this as well (particularly the slide cam, but I do not have photos of that).

1. Remove the two screws (already removed in this photo) and retaining clip.


Disassembling it is a relatively easy process
getting it back together is where things could got tricky
_________________
Easy and quick faxless payday loans at https://directloantransfer.com/faxless-payday-loans/ site.
Offline
 Profile  
 
 Post subject: Re: [CLD-D501][CLD-D502][CLD-D701][CLD-D702] Clamper Disasse
PostPosted: 16 Apr 2021, 18:42 
Advanced fan
Advanced fan
User avatar

Joined: 28 Jun 2014, 05:59
Posts: 853
Location: San Francisco, CA USA
Has thanked: 141 times
Been thanked: 241 times
I've been having eject issues on my two Denon LA-3100s' for quite some time and assumed it was always the clamper magnet being stronger than the Pioneer units I have (which may still be true). Thanks for the advice and definitely will try this out. :thumbup:
Offline
 Profile  
 
 Post subject: Re: [CLD-D501][CLD-D502][CLD-D701][CLD-D702] Clamper Disasse
PostPosted: 16 Apr 2021, 20:09 
Hardcore fan
Hardcore fan
User avatar

Joined: 13 Aug 2018, 03:18
Posts: 1045
Has thanked: 277 times
Been thanked: 306 times
Magnets are too strong it seems even on the Pioneer-badged units. The entire loading assembly needs a cleaning and re-grease as well + new 4.0ish belt.
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 8 posts ] 


Who is online

Users browsing this forum: Google [Bot] and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: