It is currently 29 Mar 2024, 00:21




 Page 1 of 1 [ 19 posts ] 
Author Message
 Post subject: [CLD-D704] Support?
PostPosted: 08 Jul 2020, 22:08 
Honest fan
Honest fan
User avatar

Joined: 16 Mar 2014, 01:05
Posts: 93
Location: United States
Has thanked: 2 times
Been thanked: 0 time
2 potential issues (everything else seems to work great):

A On Stop/Eject, panel or remote, system seems to take 25 seconds to follow command.
I hear it stop, 25 seconds later a click and eject.
(I thought pad/grip, but not for 25 secs... cleaned it anyway.)

B I have to be very particular with setting LD in tray hole. It will always work after a rejection and re-command Play without touching it, but often not on first tray insertion. (Maybe the system wiggles it in tray, why I started settling better in hole.) When it doesn't work, it makes a high pitched noise, I call it a Toshiba noise like an industrial motor drive, before ejection.

Anyone know these symptoms?
Just the way they work?

THX
Offline
 Profile  
 
 Post subject: Re: Support? CLD-D704
PostPosted: 08 Jul 2020, 23:13 
Hardcore fan
Hardcore fan
User avatar

Joined: 10 May 2007, 03:12
Posts: 1516
Location: United States
Has thanked: 0 time
Been thanked: 337 times
Typical 704 issues with old loading belt and old grip ring. Some disc can take one minute to spin down before the player will perform any other functions. By now the grip ring is too old to just be cleaned, it needs to be replaced using the VEB1237 found on eBay or cleaning it and coating it with Plasti-Dip. Buy a SCQ2.8 belt from the internet and replace the load belt.
Offline
 Profile  
 
 Post subject: Re: [CLD-D704] Support?
PostPosted: 09 Jul 2020, 09:42 
Honest fan
Honest fan
User avatar

Joined: 16 Mar 2014, 01:05
Posts: 93
Location: United States
Has thanked: 2 times
Been thanked: 0 time
Super, will do , thanks again.

I had not seen model based support - great idea, will follow, thx for move.
Offline
 Profile  
 
 Post subject: Re: [CLD-D704] Support?
PostPosted: 09 Jul 2020, 18:10 
Honest fan
Honest fan
User avatar

Joined: 16 Mar 2014, 01:05
Posts: 93
Location: United States
Has thanked: 2 times
Been thanked: 0 time
OK - in touch with Ethan

I have this 704, and a DVL909 and a Denon LA2300 (rumored 515 clone).
The last 2 have white rings - looks and feels like compressed Styrofoam-like product?
Would these replacements rings be appropriate for all 3 players (trying to consolidate order)?

THX again
Offline
 Profile  
 
 Post subject: Re: [CLD-D704] Support? UPDATE?
PostPosted: 19 Jul 2020, 16:55 
Honest fan
Honest fan
User avatar

Joined: 16 Mar 2014, 01:05
Posts: 93
Location: United States
Has thanked: 2 times
Been thanked: 0 time
Partial progress....

I got the grip rings from Ethan, seem to be of very consistent quality, got one on, but...

The belt (SCQ2.8 seems way too small - both length and thickness.
It (the new one) measures about 2.8 circumference, gently on my calipers, about a quarter.
My old one near the old grip ring.

Is there a better choice for the belt?


Attachments:
File comment: Existing
Existing.jpg
Existing.jpg [ 145.71 KiB | Viewed 2447 times ]
File comment: New
New Belt.jpg
New Belt.jpg [ 164.64 KiB | Viewed 2447 times ]
Offline
 Profile  
 
 Post subject: Re: [CLD-D704] Support?
PostPosted: 19 Jul 2020, 18:52 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 8093
Location: Dullaware
Has thanked: 1218 times
Been thanked: 841 times
Have you ever change a belt on a car, its pretty amazing how much things like this stretch out when comparing old to new.

I think my car belt while still working but cracked was about 1 inch larger than the new one.

If you can't get it on then that would be another story, but should be fine.
Kurtis knows what he's talking about, unless a key slipped when typing.
Offline
 Profile  
 
 Post subject: Re: [CLD-D704] Support?
PostPosted: 19 Jul 2020, 20:25 
Hardcore fan
Hardcore fan
User avatar

Joined: 28 Jun 2014, 05:59
Posts: 1451
Location: San Francisco, CA USA
Has thanked: 415 times
Been thanked: 527 times
Here is a belt comparison from a Mitsubishi, M-V7057 (704 clone). You be the judge if the newer belt seems to be the correct size.

Image
Offline
 Profile  
 
 Post subject: Re: [CLD-D704] Support?
PostPosted: 20 Jul 2020, 01:05 
Advanced fan
Advanced fan
User avatar

Joined: 21 Dec 2002, 18:44
Posts: 959
Has thanked: 0 time
Been thanked: 122 times
This player uses the same belt as every Pioneer player from 1992 on. VEB1184, which is a SCQ3.6.
Offline
 Profile  
 
 Post subject: Re: [CLD-D704] Support?
PostPosted: 20 Jul 2020, 07:22 
Hardcore fan
Hardcore fan
User avatar

Joined: 10 May 2007, 03:12
Posts: 1516
Location: United States
Has thanked: 0 time
Been thanked: 337 times
Sorry for the typo, I meant SCQ3.8
Offline
 Profile  
 
 Post subject: Re: [CLD-D704] Support?
PostPosted: 20 Jul 2020, 07:45 
Advanced fan
Advanced fan
User avatar

Joined: 02 Aug 2019, 02:29
Posts: 660
Location: Australia
Has thanked: 52 times
Been thanked: 85 times
So is it SCQ3.6 or SCQ3.8 ?
Offline
 Profile  
 
 Post subject: Re: [CLD-D704] Support?
PostPosted: 20 Jul 2020, 20:21 
Honest fan
Honest fan
User avatar

Joined: 16 Mar 2014, 01:05
Posts: 93
Location: United States
Has thanked: 2 times
Been thanked: 0 time
My existing belt (of unknown provenance) seems to be about .062 square, and about 4.4 in circumference.

Here in place:

Should I try 3.6 vs 3.8 next and is SCQ a correct prefix?


Attachments:
DSCN3101.JPG
DSCN3101.JPG [ 95.48 KiB | Viewed 2394 times ]
DSCN3100.JPG
DSCN3100.JPG [ 131.98 KiB | Viewed 2394 times ]
Offline
 Profile  
 
 Post subject: Re: [CLD-D704] Support?
PostPosted: 22 Jul 2020, 01:06 
Advanced fan
Advanced fan
User avatar

Joined: 21 Dec 2002, 18:44
Posts: 959
Has thanked: 0 time
Been thanked: 122 times
deadlegion wrote:
So is it SCQ3.6 or SCQ3.8 ?


Both will "technically" work, but the 3.8 belt will fail more quickly as it wears out.
Offline
 Profile  
 
 Post subject: Re: [CLD-D704] Support?
PostPosted: 30 Jul 2020, 12:48 
Honest fan
Honest fan
User avatar

Joined: 16 Mar 2014, 01:05
Posts: 93
Location: United States
Has thanked: 2 times
Been thanked: 0 time
blam1 - as it wears out ?

So - I 'needed' 2, so I ordered one of each - a 3.6 and a 3.8, BOTH sellers fumbled, only 1 here so far...

I am basically 'repairing' a 704 for sale, per previous complaint.

I also notice the newish belt crossover exchanges the Pio part for a 4.0 belt?

Likely all would work, and 3.6 would last longest or shortest?
(I don't 'know' pure rubber, non-fiber belts.)

I would guess....
3.6 initially stretched to fit would be slimmer in use, and fail to critical thinness fastest.
4.0 would remain 'fattest' in initial use, and last longest...?

Overall - do belts wear thin or stretch out thin due to repeated torque?

THX any, all....
Offline
 Profile  
 
 Post subject: Re: [CLD-D704] Support?
PostPosted: 30 Jul 2020, 16:07 
True fan
True fan
User avatar

Joined: 27 Jul 2014, 20:59
Posts: 298
Location: North London
Has thanked: 79 times
Been thanked: 97 times
tshephard wrote:
Overall - do belts wear thin or stretch out thin due to repeated torque?


They do indeed. I changed the belt in my 925 not too long ago and the replacement was much smaller/tighter. The old one had stretched and become loose over time, not providing the right torque.
Offline
 Profile  
 
 Post subject: Re: [CLD-D704] Support?
PostPosted: 31 Jul 2020, 16:45 
Honest fan
Honest fan
User avatar

Joined: 16 Mar 2014, 01:05
Posts: 93
Location: United States
Has thanked: 2 times
Been thanked: 0 time
Was the failure length change or thinning?
Offline
 Profile  
 
 Post subject: Re: [CLD-D704] Support?
PostPosted: 31 Jul 2020, 17:20 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 8093
Location: Dullaware
Has thanked: 1218 times
Been thanked: 841 times
Had the same issue on my DVD/Bluray player, belt got old, when old it gets larger like a car belt
and you need to replace.

I actually replaced with one that was the same size, it works but next time I'll get the correct size a slightly bit smaller.

I take it you've never had this issue before with LP turntables, Tapedecks, VCRs, Automobiles etc.
Offline
 Profile  
 
 Post subject: Re: [CLD-D704] Support?
PostPosted: 01 Aug 2020, 10:56 
True fan
True fan
User avatar

Joined: 27 Jul 2014, 20:59
Posts: 298
Location: North London
Has thanked: 79 times
Been thanked: 97 times
tshephard wrote:
Was the failure length change or thinning?

Yes it had stretched over time and became thinner and more loose. Eventually not providing any torque.
Offline
 Profile  
 
 Post subject: Re: [CLD-D704] Support?
PostPosted: 03 Aug 2020, 17:28 
Honest fan
Honest fan
User avatar

Joined: 16 Mar 2014, 01:05
Posts: 93
Location: United States
Has thanked: 2 times
Been thanked: 0 time
rein-o wrote:
I take it you've never had this issue before with LP turntables, Tapedecks, VCRs, Automobiles etc.


Nope - my experience is hard as a rock or melted, probably attics.
Offline
 Profile  
 
 Post subject: Re: [CLD-D704] Support?
PostPosted: 07 Aug 2020, 12:43 
Honest fan
Honest fan
User avatar

Joined: 16 Mar 2014, 01:05
Posts: 93
Location: United States
Has thanked: 2 times
Been thanked: 0 time
So...

The replacement hub grip ring worked great, after I finally got belt straight (vendor fumble).

The 3.8 was a hair thicker, the 3.6 same as ?OE, tried 3.6, worked so good I left it alone, I will try 3.8 on another later.
So I can confirm the 3.6 for 704 mech - I won't know about later wear, flipping it out.

THX all!
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 19 posts ] 


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: