LaserDisc Database https://forum.lddb.com/ |
|
[CLD-D515] Broken clamp? https://forum.lddb.com/viewtopic.php?f=53&t=9326 |
Page 1 of 1 |
Author: | holmside36 [ 30 Aug 2020, 15:27 ] |
Post subject: | [CLD-D515] Broken clamp? |
Hi everyone, I realise this is a long shot but one of my players has recently stopped working. It is a Pioneer CLD D 515 PAL/NTSC player, the disc (Die Hard) was failing to play an error code came up on the display H1 I have since discovered this translates as the disc not reaching a sufficient spin rate. As the player was attempting to load I pressed stop, there was a loud click which sounded like the disc had dropped and was spinning on the disc tray. I opened the tray and sure enough there were circular grooves/scratches on the disc. Does this sound familiar to anyone ? Thanks for any help |
Author: | rein-o [ 30 Aug 2020, 15:51 ] |
Post subject: | Re: Pioneer CLD D 515 PAL/NTSC Player |
Sounds like you need to open this up to see what the issue it so others can help more. If I had to guess I would say the pad was slipping but now it sounds like the clamper is broken. But then again these are all shots in the dark until you open it up. |
Author: | kris [ 30 Aug 2020, 21:16 ] |
Post subject: | Re: Pioneer CLD D 515 PAL/NTSC Player |
the black prc hub on the spindle might be broken! take the bonnet off and check the spindle motor. there is a black three legged plastic on top of the motor to center the disc. this holds down a spring... if one leg breaks.... |
Author: | holmside36 [ 01 Sep 2020, 18:33 ] |
Post subject: | Re: Pioneer CLD D 515 PAL/NTSC Player |
Thanks I really appreciate everyone’s help will open up the player and check these parts |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |