DOh... I forgot all about the service remote I ordered some time ago.. that solved it...
thanks for joggin my memory
/ V
| LaserDisc Database https://forum.lddb.com/ |
|
| [CLD-R7G] Test mode https://forum.lddb.com/viewtopic.php?f=53&t=9479 |
Page 1 of 1 |
| Author: | retro_vegard [ 16 Nov 2020, 20:36 ] |
| Post subject: | [CLD-R7G] Test mode |
I just can't seem to find the test mode point that I need to shorten to get it into test mode, anyone that has done it and know where they are? cheers V |
|
| Author: | cplusplus [ 16 Nov 2020, 21:21 ] |
| Post subject: | Re: CLD-R7G test mode |
I haven't worked on a CLD-R7G but if it is like the CLD-D604 you jump SHAKE and GND. Bottom right of main board. I'd wait for a definitive answer though- you don't want to fry something. I recommend Anderic RMC12010 so you can just do it from a remote. |
|
| Author: | retro_vegard [ 16 Nov 2020, 22:23 ] |
| Post subject: | Re: CLD-R7G test mode |
DOh... I forgot all about the service remote I ordered some time ago.. that solved it... thanks for joggin my memory / V |
|
| Author: | jakeheke [ 18 Nov 2020, 07:25 ] |
| Post subject: | Re: CLD-R7G test mode |
R7-G owner just curious what 'test mode' does? |
|
| Author: | cplusplus [ 18 Nov 2020, 16:49 ] |
| Post subject: | Re: CLD-R7G test mode |
It displays diagnostic information on the screen and allows you to turn servos on and off for adjustments. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|