|
It is currently 25 Apr 2024, 18:43
|
View unsolved topics | View unanswered posts
|
|
|
|
laserfanhld-gb
|
Post subject: Re: [CLD-D925] "No Disc" Error Posted: 15 Jan 2021, 15:48 |
Advanced fan |
|
|
Joined: 28 Jun 2019, 18:26 Posts: 569 Location: UK Has thanked: 258 times Been thanked: 237 times
|
oe8ttq wrote: Hi there,
My Pioneer CLD-D925 shows always "No Disc" , no matter if an CD or LD is inserted. Maybe a Problem with the Laser Pickup? Is there anyone in Europe left, who can repair a Pioneer CLD-D925?
Regards, Thomas Hi Thomas, Did you try operating your 925 with the top casing removed just to see what is happening during the disc loading process?
_________________ Pioneer HLD-X9/CLD-925/CLD-2950 OPPO BDP-105D EU ARCAM AVR-600 JVC DLA-X7000BE Lumagen Radiance 2144
|
|
|
|
|
laserfanhld-gb
|
Post subject: Re: [CLD-D925] "No Disc" Error Posted: 17 Jan 2021, 18:27 |
Advanced fan |
|
|
Joined: 28 Jun 2019, 18:26 Posts: 569 Location: UK Has thanked: 258 times Been thanked: 237 times
|
oe8ttq wrote: Hi,
yes , i tried without casing. The Disc loads , then the Laser moves up and down two times , then Message "No Disc" is shown. It seems the moving of the Pickup works, but it gets no Reflection from the Disc Surface. Maybe the Laser itself is broken?
Regards, Thomas As an unqualified person I'd be inclined to agree; but perhaps there is also a possibility that there could be a problem somewhere in the electronics that control the laser pickup? There are several extremely knowledgeable people on here who will hopefully pickup on your post soon and advise you much better than I On the subject of LD specialists in Europe; I do know of a very good one but unfortunately he resides in England and sadly because of this brexit stupidity we've had inflicted on us I don't know what the current situation is regarding duties/fees etc when shipping in/out of the EU In the meantime I wish you all the best in solving your 925 issue and fingers crossed it won't be the laser-pickup that is in need of replacement. Edit: Just found this in Germany, I notice LD players are mentioned so may be worth a try? http://dev.docforamps.de/
_________________ Pioneer HLD-X9/CLD-925/CLD-2950 OPPO BDP-105D EU ARCAM AVR-600 JVC DLA-X7000BE Lumagen Radiance 2144
|
|
|
|
|
oe8ttq
|
Post subject: Re: [CLD-D925] "No Disc" Error Posted: 18 Jan 2021, 07:55 |
Third post and above |
|
|
Joined: 05 Jun 2009, 19:19 Posts: 7 Location: Austria Has thanked: 0 time Been thanked: 0 time
|
Same behavior when Side B is pressed. Laser goes up/down for two Times, "No Disc" Message. It doesn´t try to move to the upper Side of the Disc. Yeah, Brexit makes things more complicated
|
|
|
|
|
laserfanhld-gb
|
Post subject: Re: [CLD-D925] "No Disc" Error Posted: 27 Jan 2021, 10:58 |
Advanced fan |
|
|
Joined: 28 Jun 2019, 18:26 Posts: 569 Location: UK Has thanked: 258 times Been thanked: 237 times
|
That sounds like a good find, if you can find someone locally who is competent with LD players it may be a good move to have him check things over first though just to confirm that the fault does actually lie with the optical block and not elsewhere. If a new pickup is fitted it will no doubt need to be fully calibrated after installation so definitely a job for someone who is fully experienced in this. Good Luck and hope all works out well
_________________ Pioneer HLD-X9/CLD-925/CLD-2950 OPPO BDP-105D EU ARCAM AVR-600 JVC DLA-X7000BE Lumagen Radiance 2144
|
|
|
|
|
oe8ttq
|
Post subject: Re: [CLD-D925] "No Disc" Error Posted: 22 Feb 2021, 09:57 |
Third post and above |
|
|
Joined: 05 Jun 2009, 19:19 Posts: 7 Location: Austria Has thanked: 0 time Been thanked: 0 time
|
Update on the Journey to get the D925 repaired The Spare Pickup arrived last week from AliExpress , looks good. It seems, that it is a New Old Stock Part. Still searching for a Company, which can replace and calibrate the Pickup Block. I have 2-3 Contacts in Germany. I´ll keep the Community updated Regards, Thomas
|
|
|
|
|
cplusplus
|
Post subject: Re: [CLD-D925] "No Disc" Error Posted: 29 Mar 2021, 23:30 |
Hardcore fan |
|
|
Joined: 13 Aug 2018, 03:18 Posts: 1520 Has thanked: 449 times Been thanked: 588 times
|
oe8ttq wrote: I tried to adjust the "Focus Gain" , but no Luck. Worth a shot. Make sure to turn it back down. Can you see any red light on the lens when it tries to detect a disc? (Don't look directly into it.) I'm wondering if the power to the pickup has failed or something similar.
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|