|
It is currently 18 Apr 2024, 13:16
|
View unsolved topics | View unanswered posts
|
|
|
|
laserfanhld-gb
|
Post subject: Re: CLD-R7G side B skipping Posted: 21 Apr 2021, 21:16 |
Advanced fan |
|
|
Joined: 28 Jun 2019, 18:26 Posts: 569 Location: UK Has thanked: 257 times Been thanked: 236 times
|
rein-o wrote: I hope others can post, there is a white plastic piece on the top bar? I think that you turn VERY SLIGHTLY to center.
I had this issue with my R7G, you must be playing on side B and turn VERY SMALL AMOUNTS.
This is ONLY if you are 100% sure its centering otherwise you will damage a very good player.
Please make sure and do all repairs at your own risk.
It has been over 8 years since I had to do this and no longer own the player and can't exactly remember where it is but its on the top and you can access it easily. I don’t know if this helps rein-o but here’s a shot of my R7G with the hood off, maybe if the part is visible here you can point it out to the OP?
_________________ Pioneer HLD-X9/CLD-925/CLD-2950 OPPO BDP-105D EU ARCAM AVR-600 JVC DLA-X7000BE Lumagen Radiance 2144
|
|
|
|
|
rein-o
|
Post subject: Re: CLD-R7G side B skipping Posted: 21 Apr 2021, 21:55 |
Jedi Master |
|
|
Joined: 03 May 2004, 19:05 Posts: 8104 Location: Dullaware Has thanked: 1219 times Been thanked: 843 times
|
When I did it it was just the white nylon screw, unless C++ knows different. Again just very little. Thanks to both above posting pics.
|
|
|
|
|
jakeheke
|
Post subject: Re: CLD-R7G side B skipping Posted: 22 Apr 2021, 05:55 |
Advanced fan |
|
|
Joined: 26 Jun 2019, 06:17 Posts: 577 Location: New Zealand Has thanked: 139 times Been thanked: 180 times
|
gergo77 wrote:
I got the remote for this player seperately. It's a CU-CLD140 remote with Japanese text for the buttons. Can someone tell me how to access the DNR feature, which I think the R7G has? That remote is for a R6G which unless im wrong will not have the V-DNR button. My R7G remote is CU-CLD150. Nissling wrote a guide here how to adjust the 3D comb filter settings. Thread is here
_________________ CLD-R7G CLD-D590 VSA-E07 AC3RF+DTS iScan DUO Processor Check out my small but loved collection here..
|
|
|
|
|
jakeheke
|
Post subject: Re: CLD-R7G side B skipping Posted: 22 Apr 2021, 07:58 |
Advanced fan |
|
|
Joined: 26 Jun 2019, 06:17 Posts: 577 Location: New Zealand Has thanked: 139 times Been thanked: 180 times
|
teddanson wrote: Once enabled, press the DEXT button. That brings up the menu on screen. . V-DNR 3D Select button will bring up the menu on screen. But you can activate D-EXT via the menu
_________________ CLD-R7G CLD-D590 VSA-E07 AC3RF+DTS iScan DUO Processor Check out my small but loved collection here..
|
|
|
|
|
cplusplus
|
Post subject: Re: CLD-R7G side B skipping Posted: 26 Apr 2021, 17:04 |
Hardcore fan |
|
|
Joined: 13 Aug 2018, 03:18 Posts: 1518 Has thanked: 447 times Been thanked: 587 times
|
gergo77 wrote: where would I have to connect it to the player? Tracking error. Don't forget to turn tilt servo on and tracking servo off.
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|