|
It is currently 19 Apr 2024, 03:37
|
View unsolved topics | View unanswered posts
|
|
|
|
rein-o
|
Post subject: Re: CLD-D701 Posted: 24 May 2021, 23:37 |
Jedi Master |
|
|
Joined: 03 May 2004, 19:05 Posts: 8105 Location: Dullaware Has thanked: 1219 times Been thanked: 844 times
|
geshat00 wrote: the power connector to the motor had detached the red wire. Any way to reattach it without soldering? I might have an soldering gun somewhere Nope, you will also need some solder as there may not be enough to make the connection.
|
|
|
|
|
geshat00
|
Post subject: Re: CLD-D701 Posted: 25 May 2021, 02:34 |
Third post and above |
|
|
Joined: 04 May 2021, 01:20 Posts: 4 Location: United States Has thanked: 0 time Been thanked: 0 time
|
rein-o wrote: geshat00 wrote: the power connector to the motor had detached the red wire. Any way to reattach it without soldering? I might have an soldering gun somewhere Nope, you will also need some solder as there may not be enough to make the connection. Well I'll have to buy a new one as I either threw mine out or gave it to a friend. Thank you for the quick response!
|
|
|
|
|
geshat00
|
Post subject: Re: [CLD-D701] Power connector disconnected Posted: 25 May 2021, 22:33 |
Third post and above |
|
|
Joined: 04 May 2021, 01:20 Posts: 4 Location: United States Has thanked: 0 time Been thanked: 0 time
|
rein-o wrote: NP but just from recent experience I picked up some cheap solder on ebay and it was really bad and didn't flow like it shoud. So careful with that.
I would just pickup a cheapie at harbor freight, will come with solder etc. If you have one near by. Yes I picked a kit up at HD. Didn't realize they're LED now. Just wondering how common this is with the wires breaking? I do realize it 30yr old electronics also just realized it's actually a 702 not a 701.
|
|
|
|
|
ldfan
|
Post subject: Re: [CLD-D701] Power connector disconnected Posted: 26 May 2021, 01:46 |
Hardcore fan |
|
|
Joined: 28 Jun 2014, 05:59 Posts: 1454 Location: San Francisco, CA USA Has thanked: 422 times Been thanked: 533 times
|
geshat00 wrote: Just wondering how common this is with the wires breaking? I do realize it 30yr old electronics also just realized it's actually a 702 not a 701. Wires coming loose has a lot to do with whether this wire is in motion in the player. Flat ribbon cables on the laser pick-up can develop cracks over time if the player is used quite a bit. I have a lot of these Alpha Turn players and I haven’t experienced any issues w/ wiring coming loose or any cold solder joints in general. Make sure when you solder the cable back that you apply enough solder and heat to ensure no cold solder. And if this cable does move with some mechanism, see about providing some strain relief if that is possible. Might help if you provide a pic so we can see what you are describing.
|
|
|
|
|
geshat00
|
Post subject: Re: [CLD-D701] Power connector disconnected Posted: 26 May 2021, 02:19 |
Third post and above |
|
|
Joined: 04 May 2021, 01:20 Posts: 4 Location: United States Has thanked: 0 time Been thanked: 0 time
|
ldfan wrote: geshat00 wrote: Just wondering how common this is with the wires breaking? I do realize it 30yr old electronics also just realized it's actually a 702 not a 701. Wires coming loose has a lot to do with whether this wire is in motion in the player. Flat ribbon cables on the laser pick-up can develop cracks over time if the player is used quite a bit. I have a lot of these Alpha Turn players and I haven’t experienced any issues w/ wiring coming loose or any cold solder joints in general. Make sure when you solder the cable back that you apply enough solder and heat to ensure no cold solder. And if this cable does move with some mechanism, see about providing some strain relief if that is possible. Might help if you provide a pic so we can see what you are describing. I tried to upload a picture, but I don't think it allowed me to. Here I'll try again
Attachments: |
20210524_171937-01-02-01.jpeg [ 438.49 KiB | Viewed 825 times ]
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|