It is currently 29 Mar 2024, 10:39




 Page 1 of 1 [ 6 posts ] 
Author Message
 Post subject: [CLD-K1100] Tray does not work properly
PostPosted: 29 Jun 2021, 12:38 
Honest fan
Honest fan
User avatar

Joined: 13 Oct 2018, 12:06
Posts: 75
Location: Germany
Has thanked: 4 times
Been thanked: 10 times
I have a CLD-K1100 with tray issues. At first it seems, that the gears where somewhat misaligned. I tried aligning them as shown in this video: https://www.youtube.com/watch?v=PvzFTeseltw but the tray still doesn't work.

I made a video of closing it without the tray actually present:
https://www.youtube.com/watch?v=o5y6kAO39-M

It seems that the "long plastic part" (see attached image) is not moving correctly. Does anyone know how the mechanism is supposed to work and how I can fix it?

Btw: I tried lifting the both side play unit manually during load / unload but it didn't help.

Any ideas?


Attachments:
IMG_20210629_125138M.jpg
IMG_20210629_125138M.jpg [ 378.1 KiB | Viewed 988 times ]
Offline
 Profile  
 
 Post subject: Re: [CLD-K1100] Tray does not work properly
PostPosted: 04 Jul 2021, 19:06 
Honest fan
Honest fan
User avatar

Joined: 13 Oct 2018, 12:06
Posts: 75
Location: Germany
Has thanked: 4 times
Been thanked: 10 times
It seems the CLD-1400 and CLD-1070 use the same mechanism.

I checked this thread: [CLD-1070] Tray Issues
and tried to align the gears according to the service manual there but it still won't work. I don't have any clue what I'm doing wrong.
Offline
 Profile  
 
 Post subject: Re: [CLD-K1100] Tray does not work properly
PostPosted: 04 Jul 2021, 20:31 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 8093
Location: Dullaware
Has thanked: 1218 times
Been thanked: 841 times
What was it doing before you tried to fix, then now what is it doing or not doing?

Do you know if someone tried to repair before you bought it?
Offline
 Profile  
 
 Post subject: Re: [CLD-K1100] Tray does not work properly
PostPosted: 05 Jul 2021, 09:12 
Honest fan
Honest fan
User avatar

Joined: 13 Oct 2018, 12:06
Posts: 75
Location: Germany
Has thanked: 4 times
Been thanked: 10 times
The previous owner claimed he does not have a 110V power source so he couldn't test.

When it arrived the tray was completely stuck. I had to disassemble a few parts and push it out. I don't remember what exactly I did, it was some time ago.

I still think the "spring slanting cam" (? the thing I marked in the picture in the first post) is not moving correctly. Even after aligning everything and putting everything in "closed" position, the spiral cam gear will hang at the slanting cam at some point.
Offline
 Profile  
 
 Post subject: Re: [CLD-K1100] Tray does not work properly
PostPosted: 05 Jul 2021, 15:53 
Honest fan
Honest fan
User avatar

Joined: 13 Oct 2018, 12:06
Posts: 75
Location: Germany
Has thanked: 4 times
Been thanked: 10 times
A similar mechanism is described here: [CLD-M403] Need help on gear alignment - M90 M301 M401 M450

But aligning the gears in open position like there doesn't work either. Also after trying open / close once the gears are misaligned again.

Here's another video with some parts removed and the gears aligned in open position: https://youtu.be/JcrTjum0Rr4
Offline
 Profile  
 
 Post subject: Re: [CLD-K1100] Tray does not work properly
PostPosted: 05 Jul 2021, 18:32 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 8093
Location: Dullaware
Has thanked: 1218 times
Been thanked: 841 times
I'm no tech but was getting more info from you about the issue.
Others will post and hopefully help you with the issue, I think it can be done but its hard to align the gears.
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 6 posts ] 


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: