It is currently 18 May 2024, 11:51




 Page 2 of 2 [ 27 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Muse / Hi-Vision discs won't auto reverse
PostPosted: 11 Jan 2017, 22:08 
Jedi Knight
Jedi Knight
User avatar

Joined: 14 Jan 2010, 09:44
Posts: 6019
Location: Ann Arbor
Has thanked: 1312 times
Been thanked: 1128 times
I had this issue but with completely different stuff. My CLD-99 would stop at the end of Side A occasionally. At this time it would also make V-DNR adjustments unnoticeable.

My theory at the time was that a bad TOC read can cause weird issues. :) I also attributed it to bad clamping (a more or less always present issue with the 99) assuming that error correction is little to non-existent on TOC reads and the startup slippage could be confusing the motor controller and the chips on the bus that see the TOC.. I've since relieved the slippage issue somewhat and haven't had the TOC problem in years now at this point.

I wish I had noticed this thread earlier, I would have mentioned my issues...
_________________
All about LD care, inner sleeves, shrink wrap, etc.

https://youtu.be/b3O-vHpHRpM
Offline
 Profile  
 
 Post subject: Re: Muse / Hi-Vision discs won't auto reverse
PostPosted: 13 Jan 2017, 06:11 
Advanced fan
Advanced fan
User avatar

Joined: 16 Jun 2015, 15:40
Posts: 825
Location: Australia
Has thanked: 105 times
Been thanked: 95 times
Yes issues reading the TOC seemed to be the best explanation at the time.

I'm guessing the problem only occurred with muse discs as perhaps it wasn't slipping too badly at that stage coupled with the higher spin-up speeds of muse, making the slippage that was there worse.

Presumably if I just left it then the problem would have happened eventually with other discs too as the grip got worse.

Thanks for you input - even if it's late!!!
_________________
Looking for Hi-Vision Discs (MUSE or HDVS).......
Offline
 Profile  
 
 Post subject: Re: Muse / Hi-Vision discs won't auto reverse
PostPosted: 13 Jan 2017, 19:47 
Jedi Knight
Jedi Knight
User avatar

Joined: 14 Jan 2010, 09:44
Posts: 6019
Location: Ann Arbor
Has thanked: 1312 times
Been thanked: 1128 times
I feel validated by your similar experience. When I reported the issue originally here nobody had any ideas. I eventually came up with the hypothesis that spindle traction was causing the issue but you're the first person I've seen say they had the same issue. You also had basically the same theory as to its cause.
_________________
All about LD care, inner sleeves, shrink wrap, etc.

https://youtu.be/b3O-vHpHRpM
Offline
 Profile  
 
 Post subject: Re: Muse / Hi-Vision discs won't auto reverse
PostPosted: 13 Jan 2017, 20:11 
Advanced fan
Advanced fan
User avatar

Joined: 16 Jun 2015, 15:40
Posts: 825
Location: Australia
Has thanked: 105 times
Been thanked: 95 times
To be fair it was Julien who first explicitly raised a TOC issue as the explanation :)
_________________
Looking for Hi-Vision Discs (MUSE or HDVS).......
Offline
 Profile  
 
 Post subject: Re: Muse / Hi-Vision discs won't auto reverse
PostPosted: 13 Jan 2017, 20:49 
Advanced fan
Advanced fan
User avatar

Joined: 16 Jun 2015, 15:40
Posts: 825
Location: Australia
Has thanked: 105 times
Been thanked: 95 times
There's this too:
CLD-2950 will not change side

and this,
"P5" error on my Denon LA2300a?
_________________
Looking for Hi-Vision Discs (MUSE or HDVS).......
Offline
 Profile  
 
 Post subject: Re: Muse / Hi-Vision discs won't auto reverse
PostPosted: 13 Jan 2017, 21:36 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 8123
Location: Dullaware
Has thanked: 1230 times
Been thanked: 853 times
Sorry i didn't read all the posts above.
But isn't this an issue with the grip ring?? I know its a different player but my 503 was not playing side B and it was due to the grip ring and
it was not able to read the TOC in start up so it couldn't get to side B.

Could it be that its dirty?? I had an issue with another player and heard noise and was told it was a dirty clamper.
Offline
 Profile  
 
 Post subject: Re: Muse / Hi-Vision discs won't auto reverse
PostPosted: 13 Jan 2017, 21:50 
Advanced fan
Advanced fan
User avatar

Joined: 16 Jun 2015, 15:40
Posts: 825
Location: Australia
Has thanked: 105 times
Been thanked: 95 times
Yes exactly.

I replaced it and the problem went away.

The posts I linked to were only meant to reinforce that faulty reading of the TOC (due to slippage) was the issue :)
_________________
Looking for Hi-Vision Discs (MUSE or HDVS).......
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 2 of 2 [ 27 posts ]  Go to page Previous  1, 2


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: