LaserDisc Database
https://forum.lddb.com/

[HLD-X9] Carriage
https://forum.lddb.com/viewtopic.php?f=54&t=8007
Page 1 of 1

Author:  retro_vegard [ 26 Aug 2018, 16:15 ]
Post subject:  [HLD-X9] Carriage

I seem to have a broken switch on the carriage, I do belive this is the switch that senses when it hits the maximum travel to the center.
Does anyone know if there´s a replacement part for this microswitch?


/ Vegard

Author:  retro_vegard [ 26 Aug 2018, 17:41 ]
Post subject:  Re: HLD-X9 carriage

The micro switch in question.

Image

Author:  rein-o [ 26 Aug 2018, 17:48 ]
Post subject:  Re: HLD-X9 carriage

I would read the sides to see if there are numbers to check on specs to search for a micro switch of the same value.

Author:  retro_vegard [ 26 Aug 2018, 17:53 ]
Post subject:  Re: HLD-X9 carriage

rein-o wrote:
I would read the sides to see if there are numbers to check on specs to search for a micro switch of the same value.


Unfortunalty there is no markings on this switch. I´m getting another X9 next week so I will have a look at that switch to see if I can see the correct angle on the switch lever to find a replacement unless someone know the actual component.

Author:  retro_vegard [ 26 Aug 2018, 18:45 ]
Post subject:  Re: HLD-X9 carriage

When I got my magnifying class out I was able to see TKR 8 on it. Seems like TKR is an Japaneese electronic company, but still no hit on the actual switch.

Author:  pbiancardi [ 21 Sep 2018, 16:45 ]
Post subject:  Re: HLD-X9 carriage

I had the exact same issue, I believe I pulled one out of a 503 (which would mean 503, 703, 704, 79, 99, S9 should all have one).

Author:  drecksoft [ 13 Oct 2023, 10:15 ]
Post subject:  Re: [HLD-X9] Carriage

Anyone has more information on this? I think I have a similar issue.

Maybe someone also knows of the switch opens or closes on reaching the end position.

Author:  drecksoft [ 27 Jan 2024, 11:46 ]
Post subject:  Re: [HLD-X9] Carriage

Seems HF9G, HF7G, D770 and D570 also have the same tray.

None of those are easy to get in Europe though. Don't want to spent a fortune to replace some piece of plastic.

That was meant for HLD-X9 damaged in transit - Help! but it fits here as well.

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/