LaserDisc Database
https://forum.lddb.com/

HLD-X9 carriage
https://forum.lddb.com/viewtopic.php?f=54&t=8007
Page 1 of 1

Author:  retro_vegard [ 26 Aug 2018, 16:15 ]
Post subject:  HLD-X9 carriage

I seem to have a broken switch on the carriage, I do belive this is the switch that senses when it hits the maximum travel to the center.
Does anyone know if there´s a replacement part for this microswitch?


/ Vegard

Author:  retro_vegard [ 26 Aug 2018, 17:41 ]
Post subject:  Re: HLD-X9 carriage

The micro switch in question.

Image

Author:  rein-o [ 26 Aug 2018, 17:48 ]
Post subject:  Re: HLD-X9 carriage

I would read the sides to see if there are numbers to check on specs to search for a micro switch of the same value.

Author:  retro_vegard [ 26 Aug 2018, 17:53 ]
Post subject:  Re: HLD-X9 carriage

rein-o wrote:
I would read the sides to see if there are numbers to check on specs to search for a micro switch of the same value.


Unfortunalty there is no markings on this switch. I´m getting another X9 next week so I will have a look at that switch to see if I can see the correct angle on the switch lever to find a replacement unless someone know the actual component.

Author:  retro_vegard [ 26 Aug 2018, 18:45 ]
Post subject:  Re: HLD-X9 carriage

When I got my magnifying class out I was able to see TKR 8 on it. Seems like TKR is an Japaneese electronic company, but still no hit on the actual switch.

Author:  pbiancardi [ 21 Sep 2018, 16:45 ]
Post subject:  Re: HLD-X9 carriage

I had the exact same issue, I believe I pulled one out of a 503 (which would mean 503, 703, 704, 79, 99, S9 should all have one).

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/