| LaserDisc Database https://forum.lddb.com/ |
|
| [HLD-X9] blinking front display https://forum.lddb.com/viewtopic.php?f=54&t=8264 |
Page 1 of 1 |
| Author: | sethp3d [ 04 Feb 2019, 15:32 ] |
| Post subject: | [HLD-X9] blinking front display |
I bought a HLD X9 a while back and it has a couple of issues. 1 sometimes the spindle slips on the discs. 2 it can't play all CAV discs, about 27000-28000 frames the video starts acting up. Also when playing a DTS disc about 30 minutes in to the disc I get audio drop outs. Issue 1 can be fixed with a rubber cushion/plasti dip. Issue 2 might be a weak laser, a scope might be needed. Now the third issue: Saturday night I played a clv disc. When I pushed stop I sort of felt that it took a bit of time to slow down. I ejected the tray but didn't get up directly to remove the disc. Just left it hanging there for a minute or two. All of the sudden the display of the player started blinking I removed the disc. When I pushed the eject button nothing happened.i pushed off then the off text on the display blinking too. I waited... no sounds nothing. I pulled the plug I gently pushed the tray back in. When I powered it on again after about a minute or two it on and the last bit of the tray got in to place. The display was still blinking (see video) https://www.dropbox.com/s/ryv78vs4wpctg ... 0.MOV?dl=0 When I pushed off it kept blinking off without anything happening. https://www.dropbox.com/s/16si9i2wuz21v ... 1.MOV?dl=0 I pulled the plug for 20- 30 minutes and tried to have a look inside the player to see if I could see if anything was in the wrong place. After removing the side panels and the lid I didn't get further and gave up it was around 3.AM. and I was getting tired. I tried a last time. Connected the power, powered it on and it worked, it made the sound I was missing before, no blinking. I could eject the tray I powered it off and it powered off as it should. I never tested to spin a disc though. Any ideas on this third mystery issue. this is the only thread I've found about HLD x9 display blinking [HLD-X9] Limit Switch Help |
|
| Author: | rein-o [ 04 Feb 2019, 16:21 ] |
| Post subject: | Re: HLD X9 blinking front display |
Why would you push the tray in after it was unplugged????? |
|
| Author: | sethp3d [ 04 Feb 2019, 16:36 ] |
| Post subject: | Re: HLD X9 blinking front display |
rein-o wrote: Why would you push the tray in after it was unplugged????? Thats a very good question, I don't have an answer to that. Also I'm a bit hazy on the details perhaps I tried to help it back in while the power was on. |
|
| Author: | rein-o [ 04 Feb 2019, 16:40 ] |
| Post subject: | Re: HLD X9 blinking front display |
Well I hope you get it working again. One of the issues sounds like slipping from the rubber mat, taking longer to stop etc. Good luck. |
|
| Author: | pbiancardi [ 05 Feb 2019, 20:34 ] |
| Post subject: | Re: HLD X9 blinking front display |
rein-o wrote: Why would you push the tray in after it was unplugged????? That doesn't hurt anything and the answer is to get it the f*** out of the way lol. |
|
| Author: | rein-o [ 05 Feb 2019, 21:14 ] |
| Post subject: | Re: HLD X9 blinking front display |
pbiancardi wrote: rein-o wrote: Why would you push the tray in after it was unplugged????? That doesn't hurt anything and the answer is to get it the f*** out of the way lol.  I've seen it done in the past on lower end players when powered on.But I wouldn't push the tray in even with the power on let alone with the power off. Such an expensive player too. 
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|