Hello "Tout le monde",

So, after cleaning the front cover before disassembling it (4 very oxidized screws), It's starting badly

I immediately saw that the main board had overheated
The fuse is in place but intact. I don't know if it was replaced by the previous owner, but if the overheating didn't blow the fuse, then the problem seems more serious, I think.

Here are photos of the part that I think overheated.

=> The first two photos are taken lengthwise on the PCB, and the other two are taken widthwise.

If a moderator thinks some of the photos are unnecessary (or too blurry), they can delete them. If you need more, let me know here or by PM, and I'll take some as soon as I'm back on the forum.





If you have any idea what the cause of the Any problems or advice on replacing components that might have been affected by this overheating? Don't hesitate to send them to me (private message or here, whichever is easier for you).

I think I'm capable of desoldering the various components and soldering in new ones, but I wouldn't know how to identify the different values ​​of the resistors and other parts to order them from specialized websites. So, if in addition to knowing the cause of the problem, you could give me a complete list of the components to buy, that would be great (a link to each component would be even better ).

Thanks in advance, Olivier

PS: I'm continuing to clean the devices and perform internal checks, hoping not to find any more "overheating issues" inside the Pioneer units