|
It is currently 30 Mar 2024, 02:14
|
View unsolved topics | View unanswered posts
|
|
|
|
Author |
Message |
pbiancardi
|
Post subject: [DVL-909] Issues with first minute of side B? Posted: 17 Nov 2015, 12:27 |
Advanced fan |
|
|
Joined: 11 Oct 2015, 16:35 Posts: 555 Location: United States Has thanked: 2 times Been thanked: 76 times
|
I have a DVL-909, it plays fine for all of side A and 99% of side B but skips and loops a couple of times in the first minute of side B. Always within the first minute, after that it plays through fine 100% of the time. If I FFWD through the couple of skips it will play fine through the rest of side B. I have tested with multiple discs, same result every time. Note that DVD playback is fine, no issues. I have tried - 1. Cleaning and greasing the rails. 2. Removing, scrubbing, and reinstalling the plastic rail. 3. Shimming the plastic rail to stabilize it. 4. Removing, cleaning, and reinstalling the plastic lever that the assembly stops at when it goes to side B. 5. Adjusting the centering of side B, this seems to have an effect but does not fix (instead of skipping at 14 sec I get it to skip at 20 sec or so). Any idea what else to try? I am suspecting an issue with that plastic lever because it seems like the assembly just has an issue getting started on side B like it goes too far on the rail and has trouble getting on track but once it starts it is fine. Should that lever be loose and easily moved back and forth? It almost seems like it should be spring loaded or something to prevent the assembly from going too far but the service manual I found does not show a schematic so I cannot tell? Is there anything else I should look at / try? The player is in perfect shape otherwise so I really want to get it working 100%. Thanks in advance for any advice.
_________________ Sony HIL-C2EX w/ AC3 Sony HIL-C1 w/ AC3 Sony MDP-999
|
|
|
|
|
pbiancardi
|
Post subject: Re: DVL-909 issues with first minute of side B? Posted: 09 Feb 2016, 15:11 |
Advanced fan |
|
|
Joined: 11 Oct 2015, 16:35 Posts: 555 Location: United States Has thanked: 2 times Been thanked: 76 times
|
sega_nomad wrote: I have the EXACT same problem on my DVL-919!
Exactly what adjustment screw did you adjust? What was your method, where it is located ect...
Thanks! Sorry just saw your post, here is what I adjusted, they are INCREDIBLY FINE adjustments, just a hair turn is the difference between smooth play and skipping. Once I got it I put some nail polish on the black screw to keep it from coming loose. I had the exact same issue pop up on a DVL-90 so I am guessing this is a common adjustment. Note that both took me hours of trial and error before I finally found the sweet spot....
_________________ Sony HIL-C2EX w/ AC3 Sony HIL-C1 w/ AC3 Sony MDP-999
|
|
|
|
|
pbiancardi
|
Post subject: Re: DVL-909 issues with first minute of side B? Posted: 14 Mar 2016, 12:08 |
Advanced fan |
|
|
Joined: 11 Oct 2015, 16:35 Posts: 555 Location: United States Has thanked: 2 times Been thanked: 76 times
|
sega_nomad wrote: Thank you very much for this information! Its so great to have access to all the knowledgeable people on here, the more detailed information like this can help many others for a long time to come. Did you get yours fixed?
_________________ Sony HIL-C2EX w/ AC3 Sony HIL-C1 w/ AC3 Sony MDP-999
|
|
|
|
|
sega_nomad
|
Post subject: Re: DVL-909 issues with first minute of side B? Posted: 16 Mar 2016, 03:39 |
Shows curiousity |
|
|
Joined: 20 Oct 2007, 06:38 Posts: 19 Location: Canada Has thanked: 1 time Been thanked: 0 time
|
pbiancardi wrote: Did you get yours fixed? I have yet to get into my DVL-919, I have been side tracked by my current (in progress) CLD-79 repair. I will post my results after I finish the 919.
_________________ LaserDisc Players: DVL-919, CLD-79 CED Player: SGT-250
|
|
|
|
|
kris
|
Post subject: Re: DVL-909 issues with first minute of side B? Posted: 25 May 2017, 21:23 |
Hardcore fan |
|
|
Joined: 05 Dec 2006, 19:08 Posts: 1181 Location: Belgium Has thanked: 47 times Been thanked: 32 times
|
cpix wrote: I just did the adjustments on the white nob and had the black screw loose, after some fine tuning the player stopped skipping, but when i tightened the black screw back it started skipping again.. losnig up the screw and the player didn't skip. what should i do? Be patient is my advice, it can be a struggle getting it right.
_________________ CLD-D925 RFD-1 CLD-99 elite Lexicon LDD-1 SR-7015 RMB-1585 DP-UB820 TX-58DX780E
|
|
|
|
|
bryanb
|
Post subject: Re: DVL-909 issues with first minute of side B? Posted: 28 Jan 2019, 03:22 |
Shows curiousity |
|
|
Joined: 18 Jun 2014, 22:06 Posts: 27 Location: United States Has thanked: 0 time Been thanked: 1 time
|
I think I am on to something. I looked again at the player, and seem to have jogged some memory. In this first image, we see the player, and the red box outlines the second, closeup image. In the close up, we see the set screw, in black, and what I am calling the cam, in white. This is the adjustment screws we are talking about I think. I got out my small flathead screw driver and found the cam, was 'loose', and roughly pointed to the position marked by the small red line. With the player playing side B, and in the process of actually skipping at around 56 seconds, I gently turned cam clockwise. The pickup head suddenly moved to around 2 minutes. I stopped the disc, and began again at 0, and it started skipping at around :45. Gently turned just a tiny schosh clockwise, the cam feeling a bit tighter each time. it jumped again. Stopped, and started at 0. This time it played all through 2:00, and I felt the problem was fixed. So I may be onto something. Didn't mess with the set screw yet. I wonder if its loose? or if the cam jumped in transit from the electronics shop?
|
|
|
|
|
pbiancardi
|
Post subject: Re: DVL-909 issues with first minute of side B? Posted: 28 Jan 2019, 19:47 |
Advanced fan |
|
|
Joined: 11 Oct 2015, 16:35 Posts: 555 Location: United States Has thanked: 2 times Been thanked: 76 times
|
forper wrote: problems like this are typical with Pioneers. Good luck! No this doesn't count. Nor do the countless Pioneer's that need loading belts, rubber cushions, trays, etc, Pioneer is the most reliable brand dammit!!!!
_________________ Sony HIL-C2EX w/ AC3 Sony HIL-C1 w/ AC3 Sony MDP-999
|
|
|
|
|
rodo
|
Post subject: Re: [DVL-909] Issues with first minute of side B? Posted: 29 May 2020, 23:50 |
Third post and above |
|
|
Joined: 25 May 2020, 09:09 Posts: 3 Location: France Has thanked: 0 time Been thanked: 1 time
|
Hello, I saw that I am not the only one that have that first minute side B looping issue on my DLV-909. I tried the method exposed in this page, it was a struggle but it's works! My experience is explained in this 2 images bellow : Thanks! Attachment:
File comment: p1
ReglageLecteurLaserdiscDVL-909LoopingSideB-001.jpg [ 415.11 KiB | Viewed 6891 times ]
Attachment:
File comment: p2
ReglageLecteurLaserdiscDVL-909LoopingSideB-002comp.jpg [ 317.39 KiB | Viewed 6891 times ]
|
|
|
|
|
admin
|
Post subject: Re: [DVL-909] Issues with first minute of side B? Posted: 05 Jun 2020, 02:13 |
Site Admin |
|
|
Joined: 07 Aug 2002, 23:37 Posts: 4541 Location: Tokyo Has thanked: 292 times Been thanked: 1138 times
|
rodo wrote: Hello, I saw that I am not the only one that have that first minute side B looping issue on my DLV-909. I tried the method exposed in this page, it was a struggle but it's works! My experience is explained in this 2 images bellow : (Message will be removed when fixed) Hey, your email address is wrong, please fix it soon!Julien
_________________ HARDWARE DATABASE HLD-X0/9 LD-S9 OPPO 105/205 SL-1200G LDD-1 MSC-4000 R2144 PONTUS II C45 MC257
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|