It is currently 04 Apr 2020, 06:51




 Page 1 of 1 [ 19 posts ] 
Author Message
 Post subject: DVL-919 Picture Breakup Problem
PostPosted: 09 Oct 2019, 09:01 
Third post and above
Third post and above
User avatar

Joined: 25 Sep 2019, 04:41
Posts: 3
Location: Australia
Has thanked: 0 time
Been thanked: 0 time
Hi All

Have a DVL-919 (the ‘E’ model) that is suffering from picture breakup. It’s a second-hand player so I don’t have any history on it other than being a 1998 manufacturing date.

It’s most noticeable during FBI warnings, studio logos, opening credits. That sort of thing. Basically anything with text becomes an unreadable shimmer. And the general picture quality is pretty iffy.

Don’t think it’s a 'rot' problem as have tried several discs but it still could be, I guess.

It tends to be a lot worse towards the start of discs on both sides. Playing a disc upside down—using side B of the player to play side A—exhibits much the same issue.

Audio is typically reproduced without issues on both the analog and digital tracks. It’s just the video that’s suffering.

Have tried running the composite output through two different composite to HDMI converters with the same result. Also tried a composite to HDMI capture card with a few different settings.

Any thoughts on where to start on this one? Have I just simply got a setting wrong? Is this a rookie error of some sort? Or is it time to break out the service manual and adjust centering and tracking?

See screen captures below.

Image

Image

Image

Many thanks for any thoughts!

Chris
Offline
 Profile  
 
 Post subject: Re: DVL-919 Picture Breakup Problem
PostPosted: 09 Oct 2019, 09:04 
Hardcore fan
Hardcore fan
User avatar

Joined: 01 Feb 2018, 02:41
Posts: 1289
Location: Finland
Has thanked: 42 times
Been thanked: 95 times
The pictures aren't loading.
Offline
 Profile  
 
 Post subject: Re: DVL-919 Picture Breakup Problem
PostPosted: 09 Oct 2019, 09:09 
Serious fan
Serious fan
User avatar

Joined: 19 Dec 2018, 10:20
Posts: 155
Location: France
Has thanked: 50 times
Been thanked: 19 times
Hi, I had the same issue when I replaced the laser pickup on my CLD D925, all the texts at the beginning were not clear, basically, to me it looks like it's the same issue, the tracking might be off and the player needs some calibration.
As I don't have any test discs nor oscilloscope for measurement, I tried and "eyeballed" the thing, it's not perfect but it works for me.
Also, did you just get the player and it always played like this, or did it worked "normally" before, and this is a new issue ?
_________________
Loyalty above else, except Honor.
Offline
 Profile  
 
 Post subject: Re: DVL-919 Picture Breakup Problem
PostPosted: 09 Oct 2019, 09:11 
Serious fan
Serious fan
User avatar

Joined: 19 Dec 2018, 10:20
Posts: 155
Location: France
Has thanked: 50 times
Been thanked: 19 times
Wait a minute, just noticed something
Quote:
Have tried running the composite output through two different composite to HDMI converters with the same result. Also tried a composite to HDMI capture card with a few different settings.

Have you tried not using any upscaler or converter and put the composite input directly into your screen ?
_________________
Loyalty above else, except Honor.
Offline
 Profile  
 
 Post subject: Re: DVL-919 Picture Breakup Problem
PostPosted: 09 Oct 2019, 15:27 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 6268
Location: United States
Has thanked: 220 times
Been thanked: 208 times
Since you aren't using LD as LD was intended, i.e. running your player into your TV of the era.

This is not rot, lucky you didn't start posting that this is rot.

Do what they said above and try running straight into a TV, you won't get this issue.

And also turn down your sharpness.
Offline
 Profile  
 
 Post subject: Re: DVL-919 Picture Breakup Problem
PostPosted: 09 Oct 2019, 16:25 
Advanced fan
Advanced fan
User avatar

Joined: 20 Feb 2011, 19:23
Posts: 1017
Location: United Kingdom
Has thanked: 12 times
Been thanked: 20 times
That looks pretty messy. Looks digital to me, maybe the TV is trying to do some processing on it? I have the same player and have hooked it up directly to modern TVs but haven't seen anything similar. How does it look on non-text parts of the disc?

I couldn't see the images, but looking at the code I could see the image URLs. For anyone else who can't see them try clicking these :

http://www.malonedigital.com/laserdisc1.png
http://www.malonedigital.com/laserdisc2.png
http://www.malonedigital.com/laserdisc3.png
_________________
Pioneer DVL-919E, Onkyo TX-NR626, LG C8 OLED.
My Collection
Offline
 Profile  
 
 Post subject: Re: DVL-919 Picture Breakup Problem
PostPosted: 09 Oct 2019, 16:53 
Advanced fan
Advanced fan
User avatar

Joined: 16 Jun 2015, 15:40
Posts: 745
Location: Australia
Has thanked: 52 times
Been thanked: 61 times
rein-o wrote:
Since you aren't using LD as LD was intended


Oh how I hate this statement. If you really want "as it was intended" then use nothing but an RF cable to connect the player!

The whole history of LD is one of embracing and bringing on new technology to get the best PQ you could. During the 90's players became chock-full of various digital processing technologies to improve their performance. IIRC Pioneer kept manufacturing players until 2009 so "of the era" includes plasma and also LCD.

Now admittedly lots of LCD's/flat panels are really s**t at handling a composite signal (more recent ones especially OLED's seem to be getting better on that). But in my house a pretty typical LCD projector and to a lesser degree LCD screen give a better overall picture than the Sony CRT of the 90's era that was the "family TV" of the time.

Of course in this case bypassing any separate convertor/scaler etc being used is a sensible step to rule out that being the issue.
Offline
 Profile  
 
 Post subject: Re: DVL-919 Picture Breakup Problem
PostPosted: 09 Oct 2019, 17:24 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 6268
Location: United States
Has thanked: 220 times
Been thanked: 208 times
While I know where you are coming from audioboyz, my post was fast.

I'm meaning when you connect your LD player to your computer to try and capture, these can do it but really weren't meant to do that.
And with all the tweeking you need to do to get the LD play right through a computer.

Scalers and other devices are fine, I haven't used a CRT in over 7 years on my LDs and can't go back after knowing how to tweek.
Offline
 Profile  
 
 Post subject: Re: DVL-919 Picture Breakup Problem
PostPosted: 09 Oct 2019, 17:51 
Hardcore fan
Hardcore fan
User avatar

Joined: 01 Feb 2018, 02:41
Posts: 1289
Location: Finland
Has thanked: 42 times
Been thanked: 95 times
rein-o wrote:
Scalers and other devices are fine, I haven't used a CRT in over 7 years on my LDs and can't go back after knowing how to tweek.

I only yesterday discovered a setting on my TV that eliminates a good deal of video noise. It does seem to give the image a bit of a green tint, but I can adjust that with the R/G slider.

I really wish my TV would just let me save settings so I could easily switch between specific ones depending on the source!
Offline
 Profile  
 
 Post subject: Re: DVL-919 Picture Breakup Problem
PostPosted: 10 Oct 2019, 00:59 
Advanced fan
Advanced fan
User avatar

Joined: 16 Jun 2015, 15:40
Posts: 745
Location: Australia
Has thanked: 52 times
Been thanked: 61 times
And don't get me wrong; CRT's are great for LD, but not necessarily going to automatically give you the best result. Admittedly that statement's a bit of a button-pusher for me because usually it's some numpty trying to tell us a CRT is "the only way to do it right". (You're no numpty rein-o!)
Offline
 Profile  
 
 Post subject: Re: DVL-919 Picture Breakup Problem
PostPosted: 10 Oct 2019, 03:48 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 6268
Location: United States
Has thanked: 220 times
Been thanked: 208 times
:lol: Numpty

From the pictures he posted it sure looks like its running through a computer, I sort of remember those types of glitches when getting bad PCBs on
arcade boards or when the connector wasn't making a clean contact.

You can get a great image from any set as long as its setup right, but computers are a whole nother ball of wax.
Offline
 Profile  
 
 Post subject: Re: DVL-919 Picture Breakup Problem
PostPosted: 10 Oct 2019, 09:03 
Third post and above
Third post and above
User avatar

Joined: 25 Sep 2019, 04:41
Posts: 3
Location: Australia
Has thanked: 0 time
Been thanked: 0 time
Thanks for your feedback, everyone. I appreciate it.

The player is newish to me.

I have two different composite-to-HDMI boxes with the same result using both.

Yes, I had been connecting to a PC via an HDMI box rather than a TV screen but will try this.

Some other LDs seem better without as much breakup during logos/titles. I noticed that when the logos/titles start to fade out, they look perfect. It’s as if I’m getting too much video signal into the HDMI box.

This is mostly observed during the first 5 minutes or so of playback however does seem to manifest to a lesser degree throughout.

I tried DVDs and it works perfectly—no picture or sound issues at all.

Certainly, in the ideal world there would be synergy between the player and screen—I would be using a CRT. But that’s not feasible for me right now.

So, if I’m not doing any of this in the spirit of how we should be watching an LD, I do apologize!

Chris
Offline
 Profile  
 
 Post subject: Re: DVL-919 Picture Breakup Problem
PostPosted: 10 Oct 2019, 10:06 
Serious fan
Serious fan
User avatar

Joined: 19 Dec 2018, 10:20
Posts: 155
Location: France
Has thanked: 50 times
Been thanked: 19 times
I see, well, you should definitely try without using your hdmi converter, it's probably the cause.
_________________
Loyalty above else, except Honor.
Offline
 Profile  
 
 Post subject: Re: DVL-919 Picture Breakup Problem
PostPosted: 17 Oct 2019, 18:16 
Honest fan
Honest fan
User avatar

Joined: 13 Dec 2016, 21:21
Posts: 75
Location: Gibraltar
Has thanked: 0 time
Been thanked: 1 time
It's the laser pickup. You need to replace it.
Offline
 Profile  
 
 Post subject: Re: DVL-919 Picture Breakup Problem
PostPosted: 17 Oct 2019, 18:31 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 6268
Location: United States
Has thanked: 220 times
Been thanked: 208 times
kaflo wrote:
It's the laser pickup. You need to replace it.

Lets not jump to repairs Tech Kaflo when he has it connected a wrong way or the computer is not picking up the analog signal.
Offline
 Profile  
 
 Post subject: Re: DVL-919 Picture Breakup Problem
PostPosted: 18 Oct 2019, 01:28 
Advanced fan
Advanced fan
User avatar

Joined: 13 Sep 2012, 23:14
Posts: 864
Location: United Kingdom
Has thanked: 81 times
Been thanked: 81 times
rein-o wrote:
kaflo wrote:
It's the laser pickup. You need to replace it.

Lets not jump to repairs Tech Kaflo when he has it connected a wrong way or the computer is not picking up the analog signal.


Yeh please don't do any tweeks or "repairs" till you have fed it directly to your TV & not through anything else - that could fix the issue.

Hope it is a simple fix & a direct feed helps, please keep us posted.

Cheers
_________________
You better stay home -
And do as you're told -
Get out of the road if you want to grow old
Offline
 Profile  
 
 Post subject: Re: DVL-919 Picture Breakup Problem
PostPosted: 01 Nov 2019, 15:28 
Second post
Second post
User avatar

Joined: 01 Nov 2019, 14:31
Posts: 2
Location: United States
Has thanked: 0 time
Been thanked: 0 time
I suppose It's the laser pickup. You need to replace it asap
_________________
My setup: ASUS ROG Strix GL703GM-DS74
Offline
 Profile  
 
 Post subject: Re: DVL-919 Picture Breakup Problem
PostPosted: 02 Nov 2019, 04:01 
Hardcore fan
Hardcore fan
User avatar

Joined: 11 Jun 2008, 06:10
Posts: 1377
Location: Milky Way-Sol System-Terra-USA-North Carlolina.
Has thanked: 126 times
Been thanked: 82 times
I primarily utilize the DVL-919....
Never experienced this problem since 2008 rotating 4 different units throughout the years.....

Trouble shoot any way neccessary......
_________________
Acta Non Verba .....
Si Vis Pacem Para Bellum ....
Si Gorgiamus Allos Subjectatos Nunc ......
Offline
 Profile  
 
 Post subject: Re: DVL-919 Picture Breakup Problem
PostPosted: 09 Nov 2019, 01:24 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 6268
Location: United States
Has thanked: 220 times
Been thanked: 208 times
amirax wrote:
I suppose It's the laser pickup. You need to replace it asap

Thank you tech amirax, I will pass on your expertise.
Please make sure all tweeks and repairs are done at your own risk and make sure the advice is coming from people who know or have
read about a proper repair.
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 19 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: