| LaserDisc Database https://forum.lddb.com/ |
|
| [DVL-909] Tray closes immediately after opening https://forum.lddb.com/viewtopic.php?f=55&t=9147 |
Page 1 of 1 |
| Author: | drecksoft [ 26 Jun 2020, 11:20 ] |
| Post subject: | [DVL-909] Tray closes immediately after opening |
I have a DVL-909 which plays fine but when I open the tray the motor won't stop even when it is fully ejected and after a few seconds, the tray closes again. So to insert a disc, I have to use the power button once the tray is out. I assume there is some kind of "stop switch" that is not triggered but I could not find anything. It happens with the LD and the CD tray. Any hints? |
|
| Author: | drecksoft [ 26 Jun 2020, 12:08 ] |
| Post subject: | Re: [DVL-909] Tray closes immediately after opening |
Just found it. The mechanism right at the front didn't retract properly. I now loosened the screws holding it a bit and it's working. Attachment:
File comment: Wrong position IMG_4643M.jpg [ 354.19 KiB | Viewed 1407 times ] Attachment:
File comment: Right position
IMG_4647M.jpg [ 359.89 KiB | Viewed 1407 times ] |
|
| Author: | jakeheke [ 26 Jun 2020, 12:16 ] |
| Post subject: | Re: [DVL-909] Tray closes immediately after opening |
Great stuff  Hopefully this may help someone in the future also |
|
| Author: | je280 [ 26 Jun 2020, 12:57 ] |
| Post subject: | Re: [DVL-909] Tray closes immediately after opening |
Yes well done with that & thanks for posting the details here, as above that may help someone else in the future. Cheers  .
|
|
| Author: | ldfan [ 26 Jun 2020, 17:30 ] |
| Post subject: | Re: [DVL-909] Tray closes immediately after opening |
Maybe the black slider plate needs to be re-greased as well? I know the one's in my Denon LA-3100 units need it very soon as it's making it hard to load and unload right now. |
|
| Author: | tasuke [ 27 Jun 2020, 14:31 ] |
| Post subject: | Re: [DVL-909] Tray closes immediately after opening |
my second ever LD player was a 1987 PIONEER LD-838D i had back around 2006/2007 that suffered a similar issue. IIRC, it had a dirty TACT switch for tray position detection that helped some when i cleaned it, but, of course, what really did the trick was a full proper relubrication. i must have had that model for about a couple years or so, before finding my CLD-3030 from an EBAY seller. as my personal dream-player, i found the service manual early on, and learned how to give the deck a complete refit and relube, and in the decade since, the player has proven as reliably trouble-free as i could ever ask for... |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|