| LaserDisc Database https://forum.lddb.com/ |
|
| [MDP-600] Caps and CD not playing https://forum.lddb.com/viewtopic.php?f=56&t=10626 |
Page 1 of 1 |
| Author: | drfrizog [ 19 Nov 2022, 09:28 ] |
| Post subject: | [MDP-600] Caps and CD not playing |
it had 10 leaking caps on it, which i changed. after that i replaced a blown microfuse, that i blew slippint with my voltmeter. the power supply voltages are not all right, i changed every cap, and checked everything that wasn'y a service mounted chip. just one of the voltages is just too off...i think its a plwn surface mount power amp switch on the board, according to my intermediate knowledge. I'll get the exact voltages if anyone cares. the unregulated 16vand -16v is only 14.63, and -15.5v, the 8v,-8v is good , the 5v is good, but the power mute check voltage is only 14v out of 17v. i got it to play a laserdisc, but could not detect a cd. then I got it to play a CD but not a laserdisc(this is playing with the servo tilt controls) Then while checking the microprocessor frequency according to the manual...it decided to not play on side A but go into OFF mode, but i was able to select side B while the tray was open and it played side B. now, it can't detect THE LASERDISC, SAYS NO DISC. But it will go into OFF mode if I put a cd in. why do people want these sony POS's? I don't think it's the micro processor. Ibought a cheapo frequency counter, the servicer manual says 14.318180 MHZ plus or minus 40HZ. well my counter only goes 4 digits pasts the decimal...so I have 14.3181 but dancing back and forth from and 1 and 2 on the final digit. i think i'll go back to figuring out the voltage problems, since its decided to stop functioning completly now. there is a debugging mode if i get the remote.. which i ordered. maybe i can figure why it can't play a cd with out s****ing its pants, and flashing off. |
|
| Author: | rein-o [ 19 Nov 2022, 21:12 ] |
| Post subject: | Re: Sony MDP-600 |
drfrizog wrote: why do people want these sony POS's? No Idea. |
|
| Author: | ldfan [ 20 Nov 2022, 08:08 ] |
| Post subject: | Re: Sony MDP-600 |
There are a set of power supply caps on the main board hidden within a metal cage. Have you replaced those caps as well? |
|
| Author: | drfrizog [ 23 Nov 2022, 17:41 ] |
| Post subject: | Re: Sony MDP-600 |
oh man, i see that cage now, thanks...maybe it's not the crappy main voltages, just further regulation down the line. thanks I'll check it out..when I decide to dive back in. |
|
| Author: | ldfan [ 23 Nov 2022, 19:28 ] |
| Post subject: | Re: Sony MDP-600 |
Based on what I have heard from cplusplus and various YouTube videos, the issue on the MDP-600 should only be bad caps and nothing more. Thus, don’t mess with any settings until you get those last caps replaced. I just got an MDP-600 awhile back and I’ll be working on it as well when I get a chance. |
|
| Author: | tasuke [ 24 Nov 2022, 15:12 ] |
| Post subject: | Re: Sony MDP-600 |
drfrizog wrote: why do people want these sony POS's? Because it is a SONY, and it is generally, -and somewhat foolishly- Presumed that it isn't any BOLONEY... |
|
| Author: | ldfan [ 26 Nov 2022, 21:09 ] |
| Post subject: | Re: Sony MDP-600 |
drfrizog wrote: why do people want these sony POS's? I don’t think I’ve heard anyone lately express any kind of interest in Sony LD players. But I would expect a Sony fanboy would have it on their list. Anyway, the reason I have an MDP-600 is because someone was giving it away for free (same for an MDP-650 I have as well). If I had to pay for one, I probably wouldn’t even consider them because of their propensity to having issues. Anyway, since I know the 600 is a cap issue, it was a no brainer to take it and see about making a fix. If it turns out to not be the fix, I could remove the new caps and just dispose of the player and not feel I wasted a lot of money on it. |
|
| Author: | drfrizog [ 30 Nov 2022, 21:33 ] |
| Post subject: | Re: Sony MDP-600 |
it plays finevon b side. but it doesnt spin the disc up on A side and has a focusing issues and goes it emergency power off. but if I spin the disc by hand. it will try to focus and play! what tells the servo to spin up? sensor? |
|
| Author: | drfrizog [ 30 Nov 2022, 23:34 ] |
| Post subject: | Re: Sony MDP-600 |
maybe it's not getting the signal to go clockwise spin. |
|
| Author: | admin [ 29 Sep 2023, 04:11 ] |
| Post subject: | Re: Sony MDP-600 |
drfrizog wrote: maybe it's not getting the signal to go clockwise spin. Similar issue popped up in [MDP-600] Won’t spin backwards (counter-clockwise) and was successfully fixed. (one transistor was dead and needed replacement to get the right voltage out) Julien |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|