It is currently 28 Mar 2024, 09:43




 Page 1 of 1 [ 7 posts ] 
Author Message
 Post subject: [CDV-W901] Burned power board. Any help?
PostPosted: 28 Jun 2019, 20:47 
Second post
Second post
User avatar

Joined: 27 Mar 2018, 22:48
Posts: 2
Location: United States
Has thanked: 0 time
Been thanked: 0 time
Is there anywhere that I can buy a new power board for my CDV-W901? The old one got burned by accident.
Offline
 Profile  
 
 Post subject: Re: CDV-W901 with a burned power board. Any help?
PostPosted: 28 Jun 2019, 23:53 
Hardcore fan
Hardcore fan
User avatar

Joined: 13 Aug 2018, 03:18
Posts: 1512
Has thanked: 443 times
Been thanked: 584 times
In all likelihood, no unfortunately. This is a Pioneer CLD-D604 clone and the power supply assembly for it is part VWR1256. It is not in stock at Pioneer, but if it was it would cost $165.

Can you go in detail on what you mean by burned?

Also you might find this thread helpful: Yamaha W901 and CLD-50? audio mods
Offline
 Profile  
 
 Post subject: Re: CDV-W901 with a burned power board. Any help?
PostPosted: 29 Jun 2019, 00:53 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 8093
Location: Dullaware
Has thanked: 1218 times
Been thanked: 841 times
If you are certain its the power supply start writing down the cap values and resistors, try and make sure which are blown
and start replacing.

Sorry you blew it literally.
Offline
 Profile  
 
 Post subject: Re: CDV-W901 with a burned power board. Any help?
PostPosted: 30 Jun 2019, 01:36 
Second post
Second post
User avatar

Joined: 27 Mar 2018, 22:48
Posts: 2
Location: United States
Has thanked: 0 time
Been thanked: 0 time
cplusplus wrote:
In all likelihood, no unfortunately. This is a Pioneer CLD-D604 clone and the power supply assembly for it is part VWR1256. It is not in stock at Pioneer, but if it was it would cost $165.

Can you go in detail on what you mean by burned?

Also you might find this thread helpful: Yamaha W901 and CLD-50? audio mods

A couple of caps got burned in an accident that resulted from trying to fix a fuse.
Offline
 Profile  
 
 Post subject: Re: CDV-W901 with a burned power board. Any help?
PostPosted: 30 Jun 2019, 01:53 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 8093
Location: Dullaware
Has thanked: 1218 times
Been thanked: 841 times
So I take it you aren't able to read the values of those burned caps.
Offline
 Profile  
 
 Post subject: Re: CDV-W901 with a burned power board. Any help?
PostPosted: 30 Jun 2019, 09:23 
Absolute fan
Absolute fan
User avatar

Joined: 01 Feb 2018, 02:41
Posts: 1990
Location: Finland
Has thanked: 182 times
Been thanked: 382 times
Then wouldn't the obvious solution be to find somebody with the same board and have them look up the values on the caps that are scorched on yours?
Offline
 Profile  
 
 Post subject: Re: CDV-W901 with a burned power board. Any help?
PostPosted: 30 Jun 2019, 21:53 
Genuinely interested
Genuinely interested
User avatar

Joined: 08 Feb 2007, 17:24
Posts: 35
Location: Scotland
Has thanked: 8 times
Been thanked: 5 times
The CLD-D604 service manual is in manuals.lddb.com; there's a full schematic of the power supply in there.
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 7 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: