LaserDisc Database

[LA-3500] Tray belt?
Page 1 of 1

Author:  jefflang [ 17 Dec 2020, 17:19 ]
Post subject:  [LA-3500] Tray belt?

Denon LA-3500 Tray belt?

Before I cut and measure the old one, was curious if anyone knows exact replacement.

Author:  cplusplus [ 17 Dec 2020, 20:39 ]
Post subject:  Re: Denon LA-3500 Tray belt?

I do not. I tried giving a belt to someone based on sizing of a LX-900, but he said it did not fit. He sent a photo and it did not look like the LX-900 photo I took of the same loading area.

I went as far as calling Denon which of course resulted in nothing.

Author:  ldfan [ 17 Dec 2020, 22:04 ]
Post subject:  Re: Denon LA-3500 Tray belt?

Don't cut the belt :shock:

If you happen to still have a local repair shop, see if you can ask them to size up a belt that they might have available. You just need to bring the original in (uncut) so they can measure one out slightly smaller.

Wished our database for the Panasonic LX-600/900 was more complete but that's the way it goes sometimes.

Author:  jefflang [ 18 Dec 2020, 03:05 ]
Post subject:  Re: Denon LA-3500 Tray belt?

Shows how to measure if belt is broken. This gave me the idea to cut the belt to get measurements.
With lock-down here in the GTA would be almost impossible to bring old belt in to a shop.

Author:  rein-o [ 18 Dec 2020, 03:16 ]
Post subject:  Re: Denon LA-3500 Tray belt?

Don't cut, take it off lay it flat UNCUT and measure, take a pic and contact someone who sells belts.
I had this issue and they sold me the correct belt for a DVD player.

Showed them a pic and they gave me the size.
Would be best if you have a caliper.
Good luck.

Edit: i've used that site and it doesn't work, find the person who is selling belts and show them a pic if
they know what they're doing they will get you a correct belt.

I didn't stretch it with pens but lay it flat and try to make it round as possible without distortion.

When I did that site for measuring I had to buy twice, so I am stuck with the wrong size.

The seller on ebay I used who helped incredibly was marvac_2001

Author:  cplusplus [ 18 Dec 2020, 04:02 ]
Post subject:  Re: Denon LA-3500 Tray belt?

I wish I could remember exactly the size of belt I gave him. I think it was either a 3.6 or 4.0. It fit great on a LX-900 but he said it was too small for his LA-3500. Take this with a grain of salt though.

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group