| LaserDisc Database https://forum.lddb.com/ |
|
| [LA-3500] Tray belt? https://forum.lddb.com/viewtopic.php?f=58&t=9533 |
Page 1 of 1 |
| Author: | jefflang [ 17 Dec 2020, 17:19 ] |
| Post subject: | [LA-3500] Tray belt? |
Denon LA-3500 Tray belt? Before I cut and measure the old one, was curious if anyone knows exact replacement. |
|
| Author: | cplusplus [ 17 Dec 2020, 20:39 ] |
| Post subject: | Re: Denon LA-3500 Tray belt? |
I do not. I tried giving a belt to someone based on sizing of a LX-900, but he said it did not fit. He sent a photo and it did not look like the LX-900 photo I took of the same loading area. I went as far as calling Denon which of course resulted in nothing. |
|
| Author: | ldfan [ 17 Dec 2020, 22:04 ] |
| Post subject: | Re: Denon LA-3500 Tray belt? |
Don't cut the belt  If you happen to still have a local repair shop, see if you can ask them to size up a belt that they might have available. You just need to bring the original in (uncut) so they can measure one out slightly smaller. Wished our database for the Panasonic LX-600/900 was more complete but that's the way it goes sometimes. |
|
| Author: | jefflang [ 18 Dec 2020, 03:05 ] |
| Post subject: | Re: Denon LA-3500 Tray belt? |
https://www.studiosoundelectronics.com/beltmeas.htm Shows how to measure if belt is broken. This gave me the idea to cut the belt to get measurements. With lock-down here in the GTA would be almost impossible to bring old belt in to a shop. |
|
| Author: | rein-o [ 18 Dec 2020, 03:16 ] |
| Post subject: | Re: Denon LA-3500 Tray belt? |
Don't cut, take it off lay it flat UNCUT and measure, take a pic and contact someone who sells belts. I had this issue and they sold me the correct belt for a DVD player. Showed them a pic and they gave me the size. Would be best if you have a caliper. Good luck. Edit: i've used that site and it doesn't work, find the person who is selling belts and show them a pic if they know what they're doing they will get you a correct belt. I didn't stretch it with pens but lay it flat and try to make it round as possible without distortion. When I did that site for measuring I had to buy twice, so I am stuck with the wrong size. The seller on ebay I used who helped incredibly was marvac_2001 |
|
| Author: | cplusplus [ 18 Dec 2020, 04:02 ] |
| Post subject: | Re: Denon LA-3500 Tray belt? |
I wish I could remember exactly the size of belt I gave him. I think it was either a 3.6 or 4.0. It fit great on a LX-900 but he said it was too small for his LA-3500. Take this with a grain of salt though. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|