Added a new field for the chassis specs/dimensions: Rackable

As in "19in-wide standard rack mounting compatible".

It can be "unrackable" (most consumer LD Players are not rackable) or provide the number of standard RUs (Rack Units = 1.75in or 44.45mm).

Also added I2S over HMDI LVDS to Audio Digital inputs and increased USB DAC PCM max frequency to 1,536kHz and USB DAC DSD to DSD1024.

Next will be HDMI AUDIO (ARC) IN.

Julien

Added yesterday (for devices with DACs, as found in the user manual):

• Frequency Response Low (Hz)
• Frequency Response High (Hz)
• SN Ratio (dB EIAJ)
• Dynamic Range (dB EIAJ)
• Total Distorsion (% EIAJ)

Ex: Pioneer CLD-D925

• Frequency Response Low (Hz) => 4
• Frequency Response High (Hz) => 20000
• SN Ratio (dB EIAJ) => 115
• Dynamic Range (dB EIAJ) => 97
• Total Distorsion (% EIAJ) => 0.003

This is not a very faithful benchmark for quality but it would be interesting to see the evolution/improvement from the first Digital Audio players (Yamaha CDV-1000, etc.) till the last 90's models.

Julien

Thanks to drewmanfu0, I learned about a new video connector today!

=> DB13W3 (https://en.wikipedia.org/wiki/DB13W3) as found on the Sony MST-1000



Julien

Extended to accommodate more models (A/V receivers, etc.):

• HDMI (ARC)
• FM (F-Type)
• FM (Spring Clips)
• AM (F-Type)
• AM (Spring Clips)
• External Clock Sync or Clock Signal (BNC)

Julien