It is currently 12 Nov 2019, 02:45




 Page 1 of 3 [ 43 posts ]  Go to page 1, 2, 3  Next
Author Message
 Post subject: Receivers and other equipments that support AC-3RF
PostPosted: 30 Oct 2011, 12:48 
Hardcore fan
Hardcore fan
User avatar

Joined: 25 Nov 2009, 00:53
Posts: 1066
Location: Sweden
Has thanked: 0 time
Been thanked: 4 times
A useful list compiled by Tony Kwong (tkmedia on LDDb) still maintained on AVSForum:

Demodulators
ada RFD-1 (1c out)
B&K DT1 (1c, 1o, 1c out) [Manual]
EAD Smart Cable (demodulator on a coax cable)
JBL Synthesis RFD-1 [Manual]
Kenwood DEM-999D (1c out) [Manual]
Kenwood DEM-9991D (1c, 1o, 1c out) [Manual]
Lexicon LDD-1 (1c, 1o, 1c out) [Manual]
McIntosh RFD-2 (1c, 10, 1c out, 1o out, 1c out)
Meridian 519 (1c out, 1o out) [Manual]
Nakamichi DE-1 (1c out)
Pioneer RFD-1 (1c, 1o, 1c out, 1o out) [Japanese Manual] [Service Manual]
Sony MOD-RF1 (1c out, 1o out) [Manual] [Service Manual]
Yamaha APD-1(1c out, 1o out) [Manual] [Service Manual]
Yamaha APD-2(1c out, 1o out)

Processor
ADCOM GDD-1 (2c in, 1o in, 5.1out, 5.1in, db25 5.1 out) [Manual]
Angstrom Director 200
Angstrom 195
Chiro C-5.1 (1o, 1c, db25 5.1 out)
Denon AVD-2000 (2c, 2o, 1o out, 5.1out, 5.1in) [Manual]
Harman Kardon ADP-303 (1c, 1o, 5.1out, 5.1in) [Manual]
JVVC AC-3 Decoder Prototype
Marantz DP-870 (1c, 1o, 5.1out, 5.1in)
McIntosh MAC-3 (4c, 4o, 4c out, 4o out, 5.1 out) [Manual]
McIntosh MSD4 (4c, 4o, 5.1out, 2ch in) [Manual]
Onkyo ED-901 (1c/1o, db25 5.1out) [Manual]
Parasound P/DD 1500 (1c, 1o, db25 5.1out, 2ch) [Manual]
Parasound P/DD 1550 (1c, 1o, db25 5.1out, 2ch) [Manual]
Pioneer Elite SP-99D (1c, 1o, LineIn1 L/R, LineIn2 L/R/C/R for ProLogic, 5.1out=L/R/C mono x2/L/R/LFE mono x2)
Pioneer Elite SP-D07 (1c, 1o, LineIn1 L/R, LineIn2 L/R/C/R for ProLogic, 5.1out=L/R/C mono x2/L/R/LFE mono x2)
Pioneer SP-D07 (1c, 1o, LineIn1 L/R, LineIn2 L/R/C/R for ProLogic, 5.1out=L/R/C mono x2/L/R/LFE mono x2)
Rotel RDA 980 (2c, 5.1 out, db25 5.1in) [Manual]
Sony SDP-EP9ES (1c, 3o, 1o out, 5.1out, 5.1in) [Manual]
Sony SDP-EP90ES (same as above unit but with MPEG audio decoding for EU)
Sony SDP-E800 (1c, 3o, 1o out, 5.1 out) [Manual]
Yamaha DDP-1 (1c, 1o, 5.1out) [Manual]

Preamp
Adcom GTP-740 (4c, 1o)
Adcom GTP-750 (4c, 1o)
B&K AVP 1030 (5c)
Denon AVP-8000 (2c, 3o, 1o out)
Denon AVP-8000DTS (2c, 3o, 1o out)
Denon AVP-A1 (2c, 3o, 1o out, 5.1 in
Integra RDC-7 (5c, 3o, 1c out, 1o out)
Kenwood KC-Z1 (4o, 4o, 1c out, 1o out)
Krell Audio+Video Standard
Marantz AV-550 (1c, 1o)
Marantz AV9000 (2c, 2o, 1c out, 1o out)
Sherwood Newcastle AVP-9080 (1c, 1o)
Sony TA-E9000ES (3c, 5o, 1o out)
Theta Casablanca (AUX Digital input card, 2 AC-3 RF inputs)
Theta Casablanca II (AUX Digital input card, 2 AC-3 RF inputs)

AV receiver/integrated amp
Denon AVC-A1 (1c, 3o, , 1o out, 5.1in)
Denon AVC-A1D (3c, 5o, 1o out)
Denon AVC-A1SE (3c, 6o, 2o out, 2x7.1in)
Denon AVC-A1SE upgrade (5c, 6o, 2o out, 2x7.1in)
Denon AVC-A1SR (5c, 6o, 2o out, 2x7.1in)
Denon AVC-A1SRA (5c, 6o, 2o out, 2x7.1in)
Denon AVC-A10SE (3c, 5o, 1o out)
Denon AVR-3200 (1c, 1o, 5.1in)
Denon AVR-3600 (1c, 1o)
Denon AVR-3600DTS (1c, 1o)
Denon AVR-5600 (1c, 3o, 1o out)
Denon AVR-5700 (3c, 5o, 1o out 7.1in)
Denon AVR-5800 (3c, 6o, 2o out, 2x7.1in)
Denon AVR-5800 upgrade (5c, 6o, 2o out, 2x7.1in)
Denon AVR-5803 (5c, 6o, 2o out, 2x7.1in)
Denon AVR-5803A (5c, 6o, 2o out, 2x7.1in)
Harman Kardon AVR-55 (1c, 1o)
Harman Kardon AVR-75 (1c, 1o)
Harman Kardon AVR-85 (1c, 1o)
Integra DTR-9.1 (5c, 3o, 1c, db25 7.1 in)
Kenwood KRV-990D
Marantz SR-14 (2c, 2o, 1c out, 1o out, 5.1 in)
Marantz SR-14EX (2c, 3o, 1c out, 1o out)
Marantz SR-14mkII (2c, 3o, 1c out, 1o out)
Marantz SR-18 (2c, 2o, 1o out, 1c out)
Marantz SR-580 (1c, 1o)
Marantz SR-680
Marantz SR-780 (1c, 1o)
Marantz SR-880 (1c, 1o)
Nakamichi IA-Tz
Onkyo TX-DS838 (1c, 1o)
Onkyo TX-DS939 (1c, 2o)
Onkyo TX-DS989 (5c, 3o, 1c out, 1o out, db25 7.1 in)
Onkyo TX-DS989v2 (5c, 3o, 1c out, 1o out, db25 7.1 in)
Pioneer SC-LX90
Pioneer SC-09TX
Pioneer VSA-AX10 (3c, 4o, 2o out, 7.1in)
Pioneer VSA-AX10Ai (3c, 3o, 2o out, 7.1in)
Pioneer VSA-AX10i (3c, 4o, 2o out, 7.1in)
Pioneer VSA-AX10i-N (3c, 4o, 2o out, 7.1in)
Pioneer VSA-AX5i (2c, 2o, 2o out, 7.1in)
Pioneer VSA-AX5i-N (2c, 2o, 2o out, 7.1in)
Pioneer VSA-AX5Ai-N (2c, 202o out, 7.1in)
Pioneer VSA-AX8 (2c, 3o, 7.1in)
Pioneer VSA-D10EX (2c, 3o)
Pioneer VSA-D10TX (2c, 2o, 5.1in)
Pioneer VSA-D2011-N (2c, 2o, 2o out, 7.1in)
Pioneer VSA-D7 (2c, 1o)
Pioneer VSA-D7EX (2c, 3o, 1o out, 7.1in)
Pioneer VSA-D8EX (2c, 3o, 2o out, 5.1in)
Pioneer VSA-D8TX (2c, 2o, 2o out, 5.1in)
Pioneer VSA-D9TX (2c, 1o)
Pioneer VSA-E06 (2c, 1o)
Pioneer VSA-E07 (2c, 2o, 1o out, 5.1in)
Pioneer VSA-E08 (2c, 3o, 2o out, 7.1in)
Pioneer VSX-05TX (2c, 1o)
Pioneer VSX-07TX
Pioneer VSX-09TX (2c, 1o)
Pioneer VSX-27TX (2c, 2o, 1o out)
Pioneer VSX-29TX (2c, 3o, 1o out, 5.1in)
Pioneer VSX-37TX (2c, 3o, 2o out, 5.1in)
Pioneer VSX-39TX (2c, 3o, 2o out, 5.1in)
Pioneer VSX-47TX (2c, 3o, 2o out, 7.1in)
Pioneer VSX-49TX (3c, 4o, 2o out)
Pioneer VSX-49TX upgrade (3c, 4o, 2o out)
Pioneer VSX-49TXi (3c, 4o, 2o out)
Pioneer VSX-59TXi (3c, 3o, 2o out)
Pioneer VSX-859RDS (2c, 3o, 2o out, 7.1 in)
Pioneer VSX-908RDS (2c, 2o, 5.1in)
Pioneer VSX-909
Pioneer VSX-909RDS (2c, 3o, 7.1in)
Pioneer VSX-99 (1c)
Pioneer VSX-D3S (1c)
Pioneer VSX-D606S
Pioneer VSX-D906S (2c, 1o)
Pioneer VSX-D99
Pioneer VSX-V555 (1c)
Sherwood Newcastle R-925RDS (1c, 1o)
Sherwood Newcastle R-945 (1c, 1o)
Sherwood Newcastle R-945mkII (1c, 1o)
Sherwood Newcastle R-945RDS (1c, 1o)
Sony STR-DA80 ES (1c, 4o, 1o out)
Sony STR-DA90 ES
Sony STR-DE915 (2o, 2o out)
Sony STR-DE1015G
Teac AG-D9100 (1c, 1o)
Toshiba XB-1507 (1c, 1o)
Toshiba XB-2000 (1c, 1o)
Yamaha DSP-A1 (3c, 5o, 1o out, 5.1in)
Yamaha DSP-A2 (1c, 4o, 1o out, 5.1in)
Yamaha DSP-AZ1 (3c, 7o, 3o out, 5.1in)
Yamaha DSP-A3090 (1c, 5o, 1o out)
Yamaha DSP-Z9 (3c, 8o, 3o out)
Yamaha RX-V1 (3c, 7o, 1o out, 5.1in)
Yamaha RX-V1GL (3c, 7o, 1o out, 5.1in)
Yamaha RX-V1000 (2c, 4o, 2o out, 5.1in)(NOTE: RDS MODEL DOES NOT HAVE AC-3RF)
Yamaha RX-V3000 (not all models have AC-3RF)(2c, 5o, 2o out, 5.1in)(NOTE: RDS MODEL DOES NOT HAVE AC-3RF)
Yamaha RX-V3000GL (not all models have AC-3RF)(2c, 5o, 2o out, 5.1in)
Yamaha RX-Z1 (3c, 7o, 3o out, 5.1in)
Yamaha RX-Z9 (5c, 8o, 3o out, 7.1in)

Optional
Audionet MAPV2 (optional internal AC-3 Demod)
Classe SSP-25 Processor
Madrigal Proceed AVP Audio Video Preamp(optional internal AC-3 Demod)
Madrigal Proceed AVP2 Audio Video Preamp(optional internal AC-3 Demod)
Madrigal Proceed PDS Digital Surround Decoder(optional internal AC-3 Demod)
Parasound RFD-1 demodulator ("For Use Only With Parasound AVC-2500 or AVC-2500u")
Theta Casa Nova (optional RF demodulator)
Linn 5103 (4c, 1o)
_________________
R7G, DVL-9, CLD-97 | H/K AVR 260| Optoma HD200X | KEF KEF KHT-3005SE 5.1 & ELIPSON PLANET L
Offline
 Profile  
 
 Post subject: Re: Recievers and other equipment that support AC-3 (RF) EU?
PostPosted: 30 Oct 2011, 19:16 
Hardcore fan
Hardcore fan
User avatar

Joined: 23 Sep 2003, 18:14
Posts: 1393
Location: United States
Has thanked: 39 times
Been thanked: 18 times
That's Tony Kwong's list. The original, which is still being updated, is here.
_________________
MUSE decoder information and user guides
LD player connexion guide
Offline
 Profile  
 
 Post subject: Re: Recievers and other equipment that support AC-3 (RF) EU?
PostPosted: 30 Oct 2011, 19:22 
Site Admin
Site Admin
User avatar

Joined: 07 Aug 2002, 23:37
Posts: 2565
Location: Tokyo
Has thanked: 84 times
Been thanked: 183 times
publius wrote:
That's Tony Kwong's list.


I'll edit the post to put the original URL on top and credit Tony of course.

Julien
_________________
LDDb on Facebook!
HLD-X9 | LG-1 | RFD-1 | MSC-4000 | Lumagen 2144
DHS-8.8 | Oppo 205 | SL-1200G
Offline
 Profile  
 
 Post subject: Re: Recievers and other equipment that support AC-3 (RF) EU?
PostPosted: 30 Oct 2011, 20:15 
Hardcore fan
Hardcore fan
User avatar

Joined: 25 Nov 2009, 00:53
Posts: 1066
Location: Sweden
Has thanked: 0 time
Been thanked: 4 times
sounds great, I just thought it should be here, just didnt know where it was from. Thanks for updating.
_________________
R7G, DVL-9, CLD-97 | H/K AVR 260| Optoma HD200X | KEF KEF KHT-3005SE 5.1 & ELIPSON PLANET L
Offline
 Profile  
 
 Post subject: Re: Receivers and other equipments that support AC-3RF
PostPosted: 04 Nov 2011, 05:33 
Site Admin
Site Admin
User avatar

Joined: 07 Aug 2002, 23:37
Posts: 2565
Location: Tokyo
Has thanked: 84 times
Been thanked: 183 times
1/ Moved to AC3RF forum.
2/ Made it a sticky post.
3/ Updated the list with links to the manuals.
_________________
LDDb on Facebook!
HLD-X9 | LG-1 | RFD-1 | MSC-4000 | Lumagen 2144
DHS-8.8 | Oppo 205 | SL-1200G
Offline
 Profile  
 
 Post subject: Re: Receivers and other equipments that support AC-3RF
PostPosted: 23 Nov 2011, 17:02 
Genuinely interested
Genuinely interested
User avatar

Joined: 17 Feb 2003, 18:36
Posts: 33
Location: United States
Has thanked: 0 time
Been thanked: 0 time
yeah, that looks like a older revision of my list. looks like there's a missing model or two and misc i/o list updates.
_________________
Sony VPH-1292 CRT PJ, Pioneer HLD-X0, Victor HR-5 WVHS, HM-DH5U DVHS, HD-7900 VHD, Denon AVR-5800.
Offline
 Profile  
 
 Post subject: Re: Receivers and other equipments that support AC-3RF
PostPosted: 09 Dec 2011, 14:40 
Honest fan
Honest fan
User avatar

Joined: 10 Sep 2002, 21:15
Posts: 68
Location: Belgium
Has thanked: 0 time
Been thanked: 0 time
which of the above models are currently available NEW ?
i was wondering... if there was an AV receiver or processor that supported 3D BluRay, the new sound formats and has AC-3 RF on board...
_________________
Pioneer ELITE LD-S2
McIntosh MLD7020
iScan HD
... and a whole lot of LD's
Offline
 Profile  
 
 Post subject: Re: Receivers and other equipments that support AC-3RF
PostPosted: 10 Dec 2011, 00:37 
Advanced fan
Advanced fan
User avatar

Joined: 03 Oct 2003, 10:06
Posts: 643
Location: at home :p
Has thanked: 13 times
Been thanked: 15 times
laserlord wrote:
which of the above models are currently available NEW ?
i was wondering... if there was an AV receiver or processor that supported 3D BluRay, the new sound formats and has AC-3 RF on board...


From what I remember the last NEW amp that included an AC3-RF input was the Pioneer LX-90 aka Susano.
It has HDMI and tons of other toys, but no 3D support. It's a bit too old for that.
Your best chance is an external AC3-RF decoder, hooked up to a new amp that supports all your needs.
Offline
 Profile  
 
 Post subject: Re: Receivers and other equipments that support AC-3RF
PostPosted: 18 Dec 2011, 21:56 
Confirmed Padawan
Confirmed Padawan
User avatar

Joined: 10 Oct 2006, 17:10
Posts: 3751
Location: United Kingdom
Has thanked: 5 times
Been thanked: 3 times
Which model works with any almost Pioneer laserdisc player with Dolby AC-3 direct to the AVR I mean can it be done without the AC-3 demodulator.
Offline
 Profile  
 
 Post subject: Re: Receivers and other equipments that support AC-3RF
PostPosted: 18 Dec 2011, 22:12 
Hardcore fan
Hardcore fan
User avatar

Joined: 23 Sep 2003, 18:14
Posts: 1393
Location: United States
Has thanked: 39 times
Been thanked: 18 times
laserbite34 wrote:
Which model works with any almost Pioneer laserdisc player with Dolby AC-3 direct to the AVR I mean can it be done without the AC-3 demodulator.

Any of the units in the list (go to the AVS Forum link for the current corrected version) under "Receiver / integrated amp" will have the AC-3 RF input with internal demodulator, so no external unit will be needed. That's why they're on the list. If you have an external demodulator, you can use any amplifier with Dolby Digital input via digital input ; if you have an external processor, you can use any amplifier with multi-channel analog inputs.
_________________
MUSE decoder information and user guides
LD player connexion guide
Offline
 Profile  
 
 Post subject: Re: Receivers and other equipments that support AC-3RF
PostPosted: 21 Dec 2011, 18:42 
Confirmed Padawan
Confirmed Padawan
User avatar

Joined: 10 Oct 2006, 17:10
Posts: 3751
Location: United Kingdom
Has thanked: 5 times
Been thanked: 3 times
publius wrote:
laserbite34 wrote:
Which model works with any almost Pioneer laserdisc player with Dolby AC-3 direct to the AVR I mean can it be done without the AC-3 demodulator.

Any of the units in the list (go to the AVS Forum link for the current corrected version) under "Receiver / integrated amp" will have the AC-3 RF input with internal demodulator, so no external unit will be needed. That's why they're on the list. If you have an external demodulator, you can use any amplifier with Dolby Digital input via digital input ; if you have an external processor, you can use any amplifier with multi-channel analog inputs.


Mate that really does pee me off! That none of the my AVR have that feature built into as mandatory!

I think I get what you’re saying cheers for that information its helped.

Well my Kenwood KRF-X9050D THX select there is no luck there for getting Dolby AC-3 from the laserdisc player

Same goes with S/H Yamaha that I brought this year Yamaha RX-V650 which I brought as it has 8channel RCA in and I can use it with Sony BDP-S550 to get DolbyTrueHD dtsHD.

But it was dead stick for trying to get Dolby AC-3 I tried different outputs from the player DVL-909 no luck I need an AC-3 demodulator!
Offline
 Profile  
 
 Post subject: Re: Receivers and other equipments that support AC-3RF
PostPosted: 20 Mar 2012, 15:59 
Hardcore fan
Hardcore fan
User avatar

Joined: 25 Nov 2009, 00:53
Posts: 1066
Location: Sweden
Has thanked: 0 time
Been thanked: 4 times
laserbite34 wrote:
publius wrote:
laserbite34 wrote:
Mate that really does pee me off! That none of the my AVR have that feature built into as mandatory!

I think I get what you’re saying cheers for that information its helped.

Well my Kenwood KRF-X9050D THX select there is no luck there for getting Dolby AC-3 from the laserdisc player

Same goes with S/H Yamaha that I brought this year Yamaha RX-V650 which I brought as it has 8channel RCA in and I can use it with Sony BDP-S550 to get DolbyTrueHD dtsHD.

But it was dead stick for trying to get Dolby AC-3 I tried different outputs from the player DVL-909 no luck I need an AC-3 demodulator!


if you have a 909 player then I would get the Pioneer VSA-E08 or the cheaper Pioneer VSX-859RDS, Pioneer VSX-909. I had the E08 for about a year, its a great reciever with AC-3, and can be found for next to nothing, here in sweden I think its usally around 250-300 GBP. But what I liked the most is that they match the design line of the 919 and 909 players. If you have the champagne-colored player. And of course it actually had input dedicated for LD!

But I got tired of not having HDMI-input and got myself a AC-3 dem. and a new reciever with hdmi. traded it for a reel to reel player which I now regrets, I will buy one again in the future just becouse of the facts I wrote.
_________________
R7G, DVL-9, CLD-97 | H/K AVR 260| Optoma HD200X | KEF KEF KHT-3005SE 5.1 & ELIPSON PLANET L
Offline
 Profile  
 
 Post subject: Re: Receivers and other equipments that support AC-3RF
PostPosted: 28 Apr 2012, 15:45 
Jedi Initiate
Jedi Initiate
User avatar

Joined: 16 May 2009, 18:05
Posts: 3045
Location: MA USA
Has thanked: 6 times
Been thanked: 52 times
I bought a lexicon ldd1 from bay about a month or so. 3 days later I bought a cld97 with some 300 lds the seller included his lexicon ldd1 with this sale. Now I have 2 lexicon ldd1 rf demodulators. Im using one on main setup with yamaha rx-a3000. I found a denon avr1905 for $50 I will use the second one with that one in my bedroom.
_________________
Wanted
HD-VMD Discs
Hi-Vision/Muse Discs Only complete/mint!
Offline
 Profile  
 
 Post subject: Re: Receivers and other equipments that support AC-3RF
PostPosted: 30 Apr 2012, 01:40 
Advanced fan
Advanced fan
User avatar

Joined: 21 Sep 2011, 15:15
Posts: 678
Location: NH, United States
Has thanked: 3 times
Been thanked: 9 times
My Sony SDP-E800 is going pretty strong! :)

Image
_________________
My Home Theater Gallery
Laserdisc Collection Storage
Offline
 Profile  
 
 Post subject: Re: Receivers and other equipments that support AC-3RF
PostPosted: 16 Oct 2013, 17:17 
User avatar
Have a Kenwood KRV-990D at home that i used for years direct from a Kenwood LVD 290 for AC3 soundtracks. Amp was a workhorse. Even though I use demodulators for my LD players hooked to Yamaha amps, kept the 990D to have anyway. Still works great. :thumbup: :thumbup:
  
 
 Post subject: Re: Receivers and other equipments that support AC-3RF
PostPosted: 16 Oct 2013, 17:32 
True fan
True fan
User avatar

Joined: 26 Oct 2012, 05:11
Posts: 360
Location: Netherlands
Has thanked: 0 time
Been thanked: 0 time
I have a Harman Kardon ADP-303, modified to switch between optical in and AC3 RF in and in stead of the 5.1 analog outputs, an optical output.

Works great! :)
Offline
 Profile  
 
 Post subject: Re: Receivers and other equipments that support AC-3RF
PostPosted: 16 Oct 2013, 19:57 
Jedi Initiate
Jedi Initiate
User avatar

Joined: 16 May 2009, 18:05
Posts: 3045
Location: MA USA
Has thanked: 6 times
Been thanked: 52 times
Theta casablanca hd III is the only ht processor currently in production which supports all current codecs/3d with 2 built in rf demodulators. It is all around phenomenal processor however it starts at $16000 with standard dacs.
_________________
Wanted
HD-VMD Discs
Hi-Vision/Muse Discs Only complete/mint!
Offline
 Profile  
 
 Post subject: Re: Receivers and other equipments that support AC-3RF
PostPosted: 18 Oct 2013, 01:30 
User avatar
Googled the Theta Casablanca HD 111. Beautiful machine to cover every hookup you'll ever need. :thumbup:
  
 
 Post subject: Re: Receivers and other equipments that support AC-3RF
PostPosted: 06 Mar 2014, 20:32 
Honest fan
Honest fan
User avatar

Joined: 19 Apr 2012, 19:09
Posts: 67
Location: United States
Has thanked: 0 time
Been thanked: 0 time
Add to the receiver listing, the NAD T770, which supports AC-3RF.
Offline
 Profile  
 
 Post subject: Re: Receivers and other equipments that support AC-3RF
PostPosted: 06 Mar 2014, 22:15 
Advanced fan
Advanced fan
User avatar

Joined: 27 Sep 2013, 13:27
Posts: 526
Location: United Kingdom
Has thanked: 0 time
Been thanked: 1 time
I've always been annoyed that I saved up for months to get my home cinema setup, a budget package sold by UK vendor Richer Sounds, and finally got the money together TWO DAYS after they sold the last of their amps with AC-3 RF input. I ended up with an amp that's better in other respects, but it would have been nice to have that built in.

So which is a basic package that gives you AC-3 RF to SPDIF (preferably optical) or 5-channel component, won't cost an arm and a leg, and runs on 240v?
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 3 [ 43 posts ]  Go to page 1, 2, 3  Next


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: