|
It is currently 19 Apr 2024, 03:36
|
View unsolved topics | View unanswered posts
|
|
|
|
teddanson
|
Post subject: Re: [CLD-D925] E0 Error Posted: 01 May 2020, 15:01 |
Absolute fan |
|
|
Joined: 16 Nov 2018, 14:21 Posts: 1570 Location: New Delaware Has thanked: 448 times Been thanked: 496 times
|
When I poked around inside I couldn't see anything broken at all around the holder. Hopefully it doesn't need one. If it is broken I hope a new one can be sourced. I'm getting it fully stripped down, regreased, balanced, laser aligned, deep cleaned and if required it will be treated to new capactiors throughout. Also a new belt will be fitted too. Double boxed courier shipping back to me too. This is all pending a diagnosis first. No work will be done if it is beyond repair. If it can be repaired I am happy to pay for a day at the health spa for my little CLD-D925. It will hopefully give my LD player many more years of service. After that I'm going to try and source a second player as a backup. Or, blow it all on something stupidly high end!
_________________ Blog: The Coterie / L'boxd: Diary Pioneer CLD-R7G, CLD-D925 | Yamaha APD-2 | DVDO Edge, VP50 Pro
|
|
|
|
|
je280
|
Post subject: Re: [CLD-D925] E0 Error Posted: 01 May 2020, 16:36 |
Hardcore fan |
|
|
Joined: 13 Sep 2012, 23:14 Posts: 1199 Location: United Kingdom Has thanked: 265 times Been thanked: 259 times
|
teddanson I really hope you get the 925 back & in good order ready to spin your discs. I take it whoever is taking on the repair/refurbishment is up to the job, great that you have found someone who can repair LD players - rare beasts nowadays. Is it travelling far or is it staying fairly local? I wish you the best of luck & look forward to you posting good news on this soon . Cheers
|
|
|
|
|
je280
|
Post subject: Re: [CLD-D925] E0 Error Posted: 01 May 2020, 23:37 |
Hardcore fan |
|
|
Joined: 13 Sep 2012, 23:14 Posts: 1199 Location: United Kingdom Has thanked: 265 times Been thanked: 259 times
|
Fingers crossed for you here as well. Hope the outcome is positive & you are spinning your big silver discs again. Cheers
|
|
|
|
|
teddanson
|
Post subject: Re: [CLD-D925] E0 Error Posted: 07 May 2020, 13:16 |
Absolute fan |
|
|
Joined: 16 Nov 2018, 14:21 Posts: 1570 Location: New Delaware Has thanked: 448 times Been thanked: 496 times
|
So the CLD-D925 has been taken apart and looked at. - Broken cog
- Broken motor holder
- Bad spindle motor
It's going to get new parts and also a full service (deep clean, new belt, re-grease etc). Not sure if I'm going to ask to get the capacitors done yet, see what condition they are in first. Lesson learned. Never play a warped disc...even by mistake!
_________________ Blog: The Coterie / L'boxd: Diary Pioneer CLD-R7G, CLD-D925 | Yamaha APD-2 | DVDO Edge, VP50 Pro
|
|
|
|
|
laserfanhld-gb
|
Post subject: Re: [CLD-D925] E0 Error Posted: 07 May 2020, 15:06 |
Advanced fan |
|
|
Joined: 28 Jun 2019, 18:26 Posts: 569 Location: UK Has thanked: 257 times Been thanked: 236 times
|
teddanson wrote: Yeah though it still works out cheaper getting it repaired and serviced (just about) than trying to source a new working CLD-D925 so it's not so bad in the grand scheme of things. Lesson totally learned though!
I'll stock up on spares (I found a place to get the cog and motor holder) and maybe look out for a knackered 925 to keep for parts if ever needed. I don't need a jillion players in my gaf gathering dust. Happy out with a clean and fully serviced player and hopefully I'll be able to get many more years from it.
Not sure when I'm going to get it shipped back yet. No massive hurry. It only arrived yesterday anyway! Yep, I reckon at the end of the day it will come back to you in far better shape than the vast majority currently offered on eBay so hopefully your money's well spent.
_________________ Pioneer HLD-X9/CLD-925/CLD-2950 OPPO BDP-105D EU ARCAM AVR-600 JVC DLA-X7000BE Lumagen Radiance 2144
|
|
|
|
|
cplusplus
|
Post subject: Re: [CLD-D925] E0 Error Posted: 12 May 2020, 18:14 |
Hardcore fan |
|
|
Joined: 13 Aug 2018, 03:18 Posts: 1518 Has thanked: 448 times Been thanked: 587 times
|
teddanson wrote: I'll take some snaps of the inside if I feel brave enough to open the player again. Don't want to tempt fate! Leave it closed. teddanson wrote: Question. What are the 'Control' ports for? It allows you to control the player from a separate Pioneer component.
|
|
|
|
|
takeshi666
|
Post subject: Re: [CLD-D925] E0 Error Posted: 13 May 2020, 07:01 |
Absolute fan |
|
|
Joined: 01 Feb 2018, 02:41 Posts: 1990 Location: Finland Has thanked: 183 times Been thanked: 384 times
|
cplusplus wrote: It allows you to control the player from a separate Pioneer component. Specifically, I think it just transmits the IR signals through the cable so you could for example have all your components hidden inside a cabinet except for one and all the IR signals would be received by that one and sent to the others. I don't think they even need to be Pioneer models?
|
|
|
|
|
je280
|
Post subject: Re: [CLD-D925] E0 Error Posted: 13 May 2020, 07:41 |
Hardcore fan |
|
|
Joined: 13 Sep 2012, 23:14 Posts: 1199 Location: United Kingdom Has thanked: 265 times Been thanked: 259 times
|
teddanson wrote: She's been all fixed up, fully serviced and is currently on the way back to me! Hopefully I'll get my little 925 back at some stage this week. The repair person sent these snaps to me. I'll take some snaps of the inside if I feel brave enough to open the player again. Don't want to tempt fate! I'll post again once it's back in it's rightful home in my AV cabinet and I've spun a few platters in it. Question. What are the 'Control' ports for? Really pleased to hear that news. I hope when she is back in your hands all is as good as new & you are spinning your LDs for many years to come. I would be gutted if my 925 ever went south. Enjoy your "new" 925
|
|
|
|
|
teddanson
|
Post subject: Re: [CLD-D925] E0 Error Posted: 13 May 2020, 11:00 |
Absolute fan |
|
|
Joined: 16 Nov 2018, 14:21 Posts: 1570 Location: New Delaware Has thanked: 448 times Been thanked: 496 times
|
jakeheke wrote: Awesome stuff , Bet your happy as! Looks like my D590 but the D925 has to be superior. PAL+ NTSC is a awesome combo Wow those do look similar! Is the D590 NTSC only? I keep thinking of getting a pure NTSC player but to be honest, the 925 does all I need it to. Both sides play, NTSC and PAL, a remote control with a jog wheel and finally AC-3 output. Ticks every single box I need. Question. I've yet to try the S-Video output on the 925. I've read here and there that it isn't that good? Anyone tried and can confirm? Thinking of investing in a good quality S-Video cable.
_________________ Blog: The Coterie / L'boxd: Diary Pioneer CLD-R7G, CLD-D925 | Yamaha APD-2 | DVDO Edge, VP50 Pro
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|