|
It is currently 19 Apr 2024, 12:55
|
View unsolved topics | View unanswered posts
|
|
|
|
Author |
Message |
teddanson
|
Post subject: DVDO VP50 Pro Posted: 28 Jul 2020, 16:23 |
Absolute fan |
|
|
Joined: 16 Nov 2018, 14:21 Posts: 1570 Location: New Delaware Has thanked: 448 times Been thanked: 496 times
|
Got a VP50 Pro on the way to me in the next few days. It will form both part of my permanent viewing setup and also be used to assist with capturing LD and VHS sources. Just wondered if folks here could give me a few pointers on the following: - Can the VP50 Pro spit out video over HDMI and fire out audio separately via SPDIF and/or Phono? The idea being using an HDMI capture device purely for video, and my Zoom U-44 for audio and marry the two in Premiere Pro or Adobe Rush etc.
- Can you manually mask off the screen? For example, to mask a Widescreen LD that has Japanese subtitles outside the picture area. A good example being Star Wars Definitive Collection Box.
- Does anyone have any nice recommended settings for the VP50 Pro? Any interesting tweaks, tips etc?
- Tom Nook is Jim Jones isn't he?
Thanks all.
_________________ Blog: The Coterie / L'boxd: Diary Pioneer CLD-R7G, CLD-D925 | Yamaha APD-2 | DVDO Edge, VP50 Pro
|
|
|
|
|
joe
|
Post subject: Re: DVDO VP50 Pro Posted: 28 Jul 2020, 17:59 |
Genuinely interested |
|
|
Joined: 23 Jul 2006, 17:16 Posts: 35 Location: United Kingdom Has thanked: 5 times Been thanked: 1 time
|
[list=1][*]Can the VP50 Pro spit out video over HDMI and fire out audio separately via SPDIF and/or Phono? The idea being using an HDMI capture device purely for video, and my Zoom U-44 for audio and marry the two in Premiere Pro or Adobe Rush etc.
Yes. You can send the video signal out from the VP50 via HDMI and the audio can be output from the phono digital out. This is so you can send the video to your TV/Monitor/Projector and the audio to your AV amp.
I have LD video signal (S-video or composite going into video input4 on vp50) and both analog (via l&r phono) and digital audio (via coaxial) going into the VP50, i then select via the vp50's OSD either the Video 4 (digital) or Stereo (analog) settings. The digital coax out from the VP50 is then fed into one input on my AV amp - so you have one input on your amp for BOTH LD analog and digital sound. I still then have to send the AC3 signal direct from my LD player to the amp via an RF demodulator. SO i have three audio feeds from the LD player, two going to the VP50, and the AC3 goes separately.
Any audio going through the VP50 will need to be lip synced (delayed) by about 90 - 110 ms (about a tenth of a second). The VP50 will calculate this delay automatically, but you can make fine adjustments manually using the VP50 settings menu.
[*]Can you manually mask off the screen? For example, to mask a Widescreen LD that has Japanese subtitles outside the picture area. A good example being Star Wars Definitive Collection Box.
Yes you can! its in the 'Borders' setting.
[*]Does anyone have any nice recommended settings for the VP50 Pro? Any interesting tweaks, tips etc?
It depends on the type, size and what your monitor/TV is. For example, I use a Pioneer 42in Plasma which has a 720 native display. Although the TV will happily receive a 1080p signal, the screen itself is 720. I have my VP50 set at 720p NTSC 60hz output.
Hope this helps.
|
|
|
|
|
juz400
|
Post subject: Re: DVDO VP50 Pro Posted: 11 Nov 2020, 17:05 |
First post |
|
|
Joined: 11 Nov 2020, 16:38 Posts: 1 Location: United Kingdom Has thanked: 0 time Been thanked: 0 time
|
Hi, hope you dont mind me tagging onto teddansons thread New here but long time Laserdisc user (1996-2020) I have just recently purchased a VP50 Pro, have only been experimenting at the moment as the Barrel Jack connector is very loose and will need replacing. Quite the bit of kit! Just finished enjoying True Lies with the picture scaled to fit my Monitor without the letterbox borders - Has been a while since I last watched I think I know why everyones PSU gives up! Have been powering it via my bench PSU, it has been drawing a shade over 4A @6V while upscaling 480i NTSC to 1080p60 When you put the VP into standby/off mode, it still draws a heafty 3.4A@ 6V from the PSU I was wondering if Im missing out on much with my v1.04 firmware? Im reading about 1.05 but not been able to locate the files
|
|
|
|
|
gypsy
|
Post subject: Re: DVDO VP50 Pro Posted: 11 Nov 2020, 21:14 |
Absolute fan |
|
|
Joined: 23 Jun 2017, 01:55 Posts: 1693 Location: United States Has thanked: 1127 times Been thanked: 346 times
|
juz400 wrote: I think I know why everyones PSU gives up! Have been powering it via my bench PSU, it has been drawing a shade over 4A @6V while upscaling 480i NTSC to 1080p60 When you put the VP into standby/off mode, it still draws a heafty 3.4A@ 6V from the PSU
I was wondering if Im missing out on much with my v1.04 firmware? Im reading about 1.05 but not been able to locate the files
Unless you have an issue or a specific need from a firmware change, it's fine to leave it alone. As for the power, I unplug them when not in use for that reason.
_________________ I have added a shop on lddb.com. Check it out, items are priced to sell.
|
|
|
|
|
teddanson
|
Post subject: Re: DVDO VP50 Pro Posted: 12 Nov 2020, 10:36 |
Absolute fan |
|
|
Joined: 16 Nov 2018, 14:21 Posts: 1570 Location: New Delaware Has thanked: 448 times Been thanked: 496 times
|
I picked up an eBay PSU recently and it seems to be working just fine. Ran in to a different problem now though and I can't tell if it's the VP50 Pro, the HDMI audio embedder or the CLD-D925. Basically I'm getting no sound at all. So far my troubleshooting checklist has been: - Try a different switch port.
- Tried different EDID settings.
- Remove the audio embedder and send digital (not analog) audio over HDMI.
- Change out to new cables throughout
- Factory reset the VP50 Pro
- Take the entire rig apart and reseat every cable and plug in my system. CLD, embedder, VP50 Pro and Switch etc.
- Connect spdif out on the CLD-D925 directly to my AVR
The only thing I haven't done is connect the CLD-D925 directly to my TV just to check audio works there. I'm running out of options, it's probably something simple I've missed but so far I'm still not getting any audio at all. Any ideas?
_________________ Blog: The Coterie / L'boxd: Diary Pioneer CLD-R7G, CLD-D925 | Yamaha APD-2 | DVDO Edge, VP50 Pro
|
|
|
|
|
teddanson
|
Post subject: Re: DVDO VP50 Pro Posted: 12 Nov 2020, 11:02 |
Absolute fan |
|
|
Joined: 16 Nov 2018, 14:21 Posts: 1570 Location: New Delaware Has thanked: 448 times Been thanked: 496 times
|
Fixed it. Feckin EDID issue again. Have it sorted and saved now. I'll document it so I don't forget. May help someone else too. I'm such a dork. .......... .......... ..........
_________________ Blog: The Coterie / L'boxd: Diary Pioneer CLD-R7G, CLD-D925 | Yamaha APD-2 | DVDO Edge, VP50 Pro
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|