It is currently 23 Jul 2024, 07:27




 Page 1 of 1 [ 9 posts ] 
Author Message
 Post subject: Anyone unfroze a dvl spindle motor?
PostPosted: 23 Mar 2024, 21:38 
Knows how to post
Knows how to post
User avatar

Joined: 23 Mar 2024, 20:17
Posts: 8
Location: United States
Has thanked: 4 times
Been thanked: 2 times
Hi all, I have just worked on a dvl-700. Recapped the power supply and replaced a bad cap on the front button board.

Everything appears to be working with the exception of the spindle motor. It’s frozen solid.

I put a few drops of turbine oil in the bearing and am just waiting to try and move it again.

Has anyone actually gotten one of these motors free this way or should I be looking for a 1057 motor?

Thank for any replies!

- Jeff
Offline
 Profile  
 
 Post subject: Re: Anyone unfroze a dvl spindle motor?
PostPosted: 10 May 2024, 19:23 
Advanced fan
Advanced fan
User avatar

Joined: 21 Dec 2002, 18:44
Posts: 969
Has thanked: 0 time
Been thanked: 126 times
Just my $.02, but DVL motors are relatively plentiful. I'd recommend replacement rather than repair.
Offline
 Profile  
 
 Post subject: Re: Anyone unfroze a dvl spindle motor?
PostPosted: 11 May 2024, 03:13 
Absolute fan
Absolute fan
User avatar

Joined: 18 Apr 2012, 18:02
Posts: 1615
Location: United States
Has thanked: 71 times
Been thanked: 89 times
IIRC you can use the core motor from any late CLD player, so it shouldn't be too difficult.
_________________
Happycube Labs: Where the past is being re-made, today. [meep!]
Offline
 Profile  
 
 Post subject: Re: Anyone unfroze a dvl spindle motor?
PostPosted: 11 May 2024, 04:49 
Advanced fan
Advanced fan
User avatar

Joined: 21 Dec 2002, 18:44
Posts: 969
Has thanked: 0 time
Been thanked: 126 times
I've used a DVL motor in a late model CLD player, but never the other way round.
Offline
 Profile  
 
 Post subject: Re: Anyone unfroze a dvl spindle motor?
PostPosted: 13 May 2024, 15:32 
Knows how to post
Knows how to post
User avatar

Joined: 20 May 2016, 21:29
Posts: 13
Location: Germany, Baden-Württemberg
Has thanked: 3 times
Been thanked: 5 times
nightrider0614 wrote:
Has anyone actually gotten one of these motors free this way or should I be looking for a 1057 motor?
- Jeff


Hi Jeff,
I have a complete used working Spindle Motor Assy VXX2579 of a DVL-909 for sale. Please send me a PM if you are interested.
Greetings from Germany
Horst Beckmann (oppelix)


Attachments:
DSC00626.JPG
DSC00626.JPG [ 157.57 KiB | Viewed 885 times ]
Offline
 Profile  
 
 Post subject: Re: Anyone unfroze a dvl spindle motor?
PostPosted: 28 May 2024, 21:05 
Knows how to post
Knows how to post
User avatar

Joined: 23 Mar 2024, 20:17
Posts: 8
Location: United States
Has thanked: 4 times
Been thanked: 2 times
Hi Horst,
I can’t seem to find a part number of the assembly on my service manual. Will this one fit?
Price and shipping to 44039 (United States)

Thanks!
Offline
 Profile  
 
 Post subject: Re: Anyone unfroze a dvl spindle motor?
PostPosted: 28 May 2024, 21:20 
Advanced fan
Advanced fan
User avatar

Joined: 21 Dec 2002, 18:44
Posts: 969
Has thanked: 0 time
Been thanked: 126 times
nightrider0614 wrote:
Hi Horst,
I can’t seem to find a part number of the assembly on my service manual. Will this one fit?
Price and shipping to 44039 (United States)

Thanks!


The only mounting part is the motor itself. It is the same for the DVL-700 and DVL-909, so the assembly above is a full drop in replacement.
Offline
 Profile  
 
 Post subject: Re: Anyone unfroze a dvl spindle motor?
PostPosted: 28 May 2024, 23:00 
Knows how to post
Knows how to post
User avatar

Joined: 20 May 2016, 21:29
Posts: 13
Location: Germany, Baden-Württemberg
Has thanked: 3 times
Been thanked: 5 times
nightrider0614 wrote:
Hi Horst,
I can’t seem to find a part number of the assembly on my service manual. Will this one fit?
Price and shipping to 44039 (United States)

Hi Jeff,
please download the Service Manual of the DVL-909 (RRV1888) and have a look at page 12 - 13.
There you will find the Spindle Motor (52) with part mumber VXM1057 and the complete Spindle Motor Assy (56) with part number VXX2579.
Then you can compare the parts with those of the DVL-700 - and insure yourself that they are the same ones.

If you want to buy my offered part, please write me a PM.
We can then discuss details in person, such as asking price, shipping costs, payment.
If we reach an agreement, we will exchange email addresses and shipping address.

Greetings from Gerrmany
Horst
Offline
 Profile  
 
 Post subject: Re: Anyone unfroze a dvl spindle motor?
PostPosted: 29 May 2024, 05:50 
Hardcore fan
Hardcore fan
User avatar

Joined: 10 May 2007, 03:12
Posts: 1533
Location: United States
Has thanked: 0 time
Been thanked: 347 times
The DVL-700 spindle motor has the clamp pad like the CLD-D704 that ages and slips, the DVL-909 clamp pad is the better choice. Use a 909 spindle motor.
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 9 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: