It is currently 17 Aug 2019, 16:08




 Page 2 of 2 [ 27 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: HLD-X9 start and stop scratching sounds
PostPosted: 12 Oct 2012, 19:45 
User avatar
cpix wrote:
Everyone, thanks for all your responses and tips to fix this problem! I dont have some valuable tips for you guys. In Norway's Pioneer repair centers, they DO have spare parts laying around their office! I talked to a very friendly guy at that sent me the part i needed just a few days later after order. they were cheap also, the DEB1159 that is the rubber part for the X9 spindle motor cost me around 40,- NOK which is in dollars 6 O_o

but what i did for you guys, i made a video on how to change it, and how annoying it is, even though i dont care about editing to much with video, it ended up being some clips, so i will be putting them together to show you guys how it is done, Norwegian style ;D

(of course as alway, i had help from Duncan and Kurtis).


HOO RAY for Norway. I look forward to seeing your video :thumbup:
  
 
 Post subject: Re: HLD-X9 start and stop scratching sounds
PostPosted: 12 Oct 2012, 21:10 
True fan
True fan
User avatar

Joined: 11 May 2009, 11:12
Posts: 270
Location: Norway
Has thanked: 0 time
Been thanked: 0 time
ldservice wrote:
cpix wrote:
Everyone, thanks for all your responses and tips to fix this problem! I dont have some valuable tips for you guys. In Norway's Pioneer repair centers, they DO have spare parts laying around their office! I talked to a very friendly guy at that sent me the part i needed just a few days later after order. they were cheap also, the DEB1159 that is the rubber part for the X9 spindle motor cost me around 40,- NOK which is in dollars 6 O_o

but what i did for you guys, i made a video on how to change it, and how annoying it is, even though i dont care about editing to much with video, it ended up being some clips, so i will be putting them together to show you guys how it is done, Norwegian style ;D

(of course as alway, i had help from Duncan and Kurtis).


HOO RAY for Norway. I look forward to seeing your video :thumbup:


Glad to help! unfortuenately premiere is a bit slow, so give it some time to finish and all :)
_________________
Pioneer KURO KRP-500M, Crystalio 2 VPS3300, Lumagen 2144, HLD-X9
Offline
 Profile  
 
 Post subject: Re: HLD-X9 start and stop scratching sounds
PostPosted: 12 Oct 2012, 23:19 
True fan
True fan
User avatar

Joined: 29 Apr 2008, 00:50
Posts: 429
Location: United States
Has thanked: 0 time
Been thanked: 1 time
cpix wrote:
Everyone, thanks for all your responses and tips to fix this problem! I dont have some valuable tips for you guys. In Norway's Pioneer repair centers, they DO have spare parts laying around their office! I talked to a very friendly guy at that sent me the part i needed just a few days later after order. they were cheap also, the DEB1159 that is the rubber part for the X9 spindle motor cost me around 40,- NOK which is in dollars 6 O_o

but what i did for you guys, i made a video on how to change it, and how annoying it is, even though i dont care about editing to much with video, it ended up being some clips, so i will be putting them together to show you guys how it is done, Norwegian style ;D

(of course as alway, i had help from Duncan and Kurtis).
Does the X9 look awesome on the Kuro? That was always a goal of mine. I'm dealing with an R7G among others models.
_________________
"You who are reading me now are a different breed, I hope a better one." (POTA 1968)
Offline
 Profile  
 
 Post subject: Re: HLD-X9 start and stop scratching sounds
PostPosted: 13 Oct 2012, 09:12 
Advanced fan
Advanced fan
User avatar

Joined: 03 Oct 2003, 10:06
Posts: 635
Location: at home :p
Has thanked: 9 times
Been thanked: 12 times
remington wrote:
Does the X9 look awesome on the Kuro? That was always a goal of mine. I'm dealing with an R7G among others models.


After tweaking with Video Essentials LD and some back and forth settings and trying the X9 does amaze me on my Kuro.
I am thinking though, that the R7G may just look as good, if you tired playing with the settings on the Kuro.
Offline
 Profile  
 
 Post subject: Re: HLD-X9 start and stop scratching sounds
PostPosted: 13 Oct 2012, 10:56 
True fan
True fan
User avatar

Joined: 11 May 2009, 11:12
Posts: 270
Location: Norway
Has thanked: 0 time
Been thanked: 0 time
lons_vex wrote:
remington wrote:
Does the X9 look awesome on the Kuro? That was always a goal of mine. I'm dealing with an R7G among others models.


After tweaking with Video Essentials LD and some back and forth settings and trying the X9 does amaze me on my Kuro.
I am thinking though, that the R7G may just look as good, if you tired playing with the settings on the Kuro.


yes! the kuro does amazing work on the X9, and also the LD-S9 and r7G do too! now with my 500m, there aren't actually any svideo input, but its not needed. the kuro i have, have adjustable Y/C separation and great noise reduction, its awesome, after installing it, i see no reason to spend any money on extra video enhancement equipment! :) it as all the features we need, deinterlacing, denoising and y/c-sep, and so on, i can take a picture of the "PRO-SETTINGS" (pioneers own words) :)
_________________
Pioneer KURO KRP-500M, Crystalio 2 VPS3300, Lumagen 2144, HLD-X9
Offline
 Profile  
 
 Post subject: Re: HLD-X9 start and stop scratching sounds
PostPosted: 14 Oct 2012, 11:07 
True fan
True fan
User avatar

Joined: 11 May 2009, 11:12
Posts: 270
Location: Norway
Has thanked: 0 time
Been thanked: 0 time
Hey guys, so i made a video about changing the rubber part on the spindle of the hld-x9, I think it mostly ended up being a lot of rambling about all other things than just the spindle.

but at least there are a lot of video of the inside of the hld-x9, and excuse my english, its NOT my native language, at all ( im norwegian) .. but anyway, maybe some of you want to see some internals of the machine. the point of it all, is that removing the old rubber is HARD, i had to use a lot of physical power to get it off, and underneath it, there are a lot of hard glue. the picture in the beginning of the video shows the tools i used, and the result was great.


https://www.youtube.com/watch?v=FC4o6CwWfYg
_________________
Pioneer KURO KRP-500M, Crystalio 2 VPS3300, Lumagen 2144, HLD-X9
Offline
 Profile  
 
 Post subject: Re: HLD-X9 start and stop scratching sounds
PostPosted: 26 Aug 2013, 16:12 
Genuinely interested
Genuinely interested
User avatar

Joined: 04 Mar 2013, 02:10
Posts: 57
Location: United Kingdom
Has thanked: 4 times
Been thanked: 0 time
Could someone confirm the correct part number for an HLD-X9 spindle rubber, because there are two different part numbers in this thread? Is it DEB1169 or DEB1159?

Thanks.
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 2 of 2 [ 27 posts ]  Go to page Previous  1, 2


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: