|
It is currently 28 Apr 2024, 03:40
|
View unsolved topics | View unanswered posts
|
|
|
|
Author |
Message |
retro_games
|
Post subject: [HLD-X9] P5 ERROR. Please help! Posted: 08 Mar 2017, 21:23 |
Shows curiousity |
|
|
Joined: 14 Nov 2016, 20:45 Posts: 22 Location: Portugal Has thanked: 0 time Been thanked: 0 time
|
I have a Pioneer HLD-X9 i bought in Japan many years ago from Nicolas, the unit was new. After 2 years from the purschase i took it off the box (2006) and it worked perfectly for 10 Minutes, then it was boxed again.
Last year i took it off the box and when i inserted the disc, it wants to start spinning (makes 2 or 3 attempts) and then doesn't spin and gives ERROR P5.
After many tries, it also gived me ERROR U1 and the tray got stucked.
I've opened the player, carefully released the tray, changed the Belt, and now it's perfect. However still gives me ERROR P5. The player inside is PERFECT, still has all the grease and everything.
I've even tried to change the GRIP Rubber on the spindle, and it's the same....
The Spindle Motor rotates manually, i've touch it. Do you guys think the motor is damaged?
Any ideas?
Tank you for your help in advance
|
|
|
|
|
rein-o
|
Post subject: Re: Pioneer HLD-X9 P5 ERROR. Please help! Posted: 09 Mar 2017, 16:45 |
Jedi Master |
|
|
Joined: 03 May 2004, 19:05 Posts: 8108 Location: Dullaware Has thanked: 1221 times Been thanked: 846 times
|
retro_games wrote: Tank you for all your suggestions.
I don't think it's the lens as the player is new, wouldn't make much sense to me, but i can give it a try. Should i clean it with alchool?
NO. Use something else, alcohol will remove a layer on the laser.
|
|
|
|
|
admin
|
Post subject: Re: Pioneer HLD-X9 P5 ERROR. Please help! Posted: 10 Mar 2017, 10:45 |
Site Admin |
|
|
Joined: 07 Aug 2002, 23:37 Posts: 4551 Location: Tokyo Has thanked: 295 times Been thanked: 1147 times
|
Thanks to this post, P5 would be a spindle/setup error. Sounds like the motor doesn't reach full rotation speed fast enough? This post would imply that it has to be reached within 60 seconds. U1 = Miss clamp, I get that sometimes on very slippery labels or when I haven't use my LD player for a while the rubber part became rigid. Giving it another spin usually fixes it. Julien
_________________ HARDWARE DATABASE HLD-X0/9 LD-S9 OPPO 105/205 SL-1200G LDD-1 MSC-4000 R2144 PONTUS II C45 MC257
|
|
|
|
|
retro_games
|
Post subject: Re: Pioneer HLD-X9 P5 ERROR. Please help! Posted: 10 Mar 2017, 17:16 |
Shows curiousity |
|
|
Joined: 14 Nov 2016, 20:45 Posts: 22 Location: Portugal Has thanked: 0 time Been thanked: 0 time
|
admin wrote: Thanks to this post, P5 would be a spindle/setup error. Sounds like the motor doesn't reach full rotation speed fast enough? This post would imply that it has to be reached within 60 seconds. U1 = Miss clamp, I get that sometimes on very slippery labels or when I haven't use my LD player for a while the rubber part became rigid. Giving it another spin usually fixes it. Julien Tank you Julien Yes it tries to spindle the disc several times (like 3 or 4) it looks like it tries to grab the disc and you hear the noise of starting to spin for 1 second and then stops....then tries again...until it gives P5. Do you think the motor got "stuck" with years past? U1 it's solved, i've changed the belt, now it's ok.
|
|
|
|
|
retro_games
|
Post subject: Re: Pioneer HLD-X9 P5 ERROR. Please help! Posted: 10 Mar 2017, 17:17 |
Shows curiousity |
|
|
Joined: 14 Nov 2016, 20:45 Posts: 22 Location: Portugal Has thanked: 0 time Been thanked: 0 time
|
forper wrote: Try tweaking the pots. That was what people here recommended I do with my LD-S9. I now have an LD-S9 brick that was worse than before, but hey maybe it'll work for you. I understand what you mean, but i will only touch it with a certain sure of what i will be doing, it's a very exepensive unit to give it tries.
|
|
|
|
|
retro_games
|
Post subject: Re: Pioneer HLD-X9 P5 ERROR. Please help! Posted: 10 Mar 2017, 23:23 |
Shows curiousity |
|
|
Joined: 14 Nov 2016, 20:45 Posts: 22 Location: Portugal Has thanked: 0 time Been thanked: 0 time
|
kencol wrote: I had a similar issue with my X9. It would produce a P5 error but only on Hi-Vision disc. Regular LD would play fine.
The motor would spin up and accelerate for a few seconds before spinning down. It would do this 3-4 times before finally popping a P5 error. It turned out it was a faulty SYPS board (system power supply). However, P5 can be due to several things. Damn! If it's the power supply do you know the part number? Just to see if it's still available... i guess i will try from there...
|
|
|
|
|
retro_games
|
Post subject: Re: Pioneer HLD-X9 P5 ERROR. Please help! Posted: 11 Mar 2017, 10:28 |
Shows curiousity |
|
|
Joined: 14 Nov 2016, 20:45 Posts: 22 Location: Portugal Has thanked: 0 time Been thanked: 0 time
|
kencol wrote: The part number is VWR1276 and it's still available but it's expensive. $235. Plus it may not be the issue. Only way to be certain is if you have a 2nd functioning X9 and swap in the board to be sure.
With the cover off, when you observe the disc spinning before the P5 error occurs, does The disc gain quite a bit of speed before slowing down and producing a P5? With mine it would pick up speed - then slow down - then pick up even more speed - then slow down again - then spin even faster for a few seconds before producing a P5.
Does the P5 happen on all discs every time? CLV, CAV and Muse discs? The disc tries to speed, and in the second or third time i think it speeds a little more....but i will make a video and try to post it. It's easy to install the supplier board? It has an easy access? primetarget wrote: Yes ^ check a few discs. P5 also seems to point to the player unable to read the disc.
I would also recommend against ever adjusting the pots. What do you mean by "adjusting the pots"?
|
|
|
|
|
retro_games
|
Post subject: Re: Pioneer HLD-X9 P5 ERROR. Please help! Posted: 11 Mar 2017, 11:44 |
Shows curiousity |
|
|
Joined: 14 Nov 2016, 20:45 Posts: 22 Location: Portugal Has thanked: 0 time Been thanked: 0 time
|
kencol wrote: I wouldn't touch any servo pots unless you know what you're doing. You need to follow a service manual and have the correct scopes and jigs to perform any kind of line up. It's not that simple a task to change the board as I remember I had to remove the mech assembly to access it. Again this diagnosis is purely a guess based on the issue I had on hi-vision discs and it may be something completely different to the SYPS board.
Your best bet may be to contact Nicolas and see if he can get it sent to pioneer Japan. Or get the player to Kurtis to diagnose. Shipping will be costly though I imagine. I think Nicolas is out of business for long now... Do you have any new contact of him?
|
|
|
|
|
rein-o
|
Post subject: Re: Pioneer HLD-X9 P5 ERROR. Please help! Posted: 13 Mar 2017, 18:49 |
Jedi Master |
|
|
Joined: 03 May 2004, 19:05 Posts: 8108 Location: Dullaware Has thanked: 1221 times Been thanked: 846 times
|
forper wrote: Try tweaking the pots. That was what people here recommended I do with my LD-S9. I now have an LD-S9 brick that was worse than before, but hey maybe it'll work for you. You get what you paid for. Free advice is just that.
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|