|
It is currently 26 Apr 2024, 14:51
|
View unsolved topics | View unanswered posts
|
|
|
|
ldfan
|
Post subject: Re: Pioneer CLD-1070 Tray Issues Posted: 11 Nov 2018, 17:57 |
Hardcore fan |
|
|
Joined: 28 Jun 2014, 05:59 Posts: 1459 Location: San Francisco, CA USA Has thanked: 425 times Been thanked: 533 times
|
Sounds pretty likely it's alignment. The blue mark should line-up with another mark on an adjacent gear but I have no idea how the alignment works. Here is the service manual for the CLD-1400 (same chassis) that might help. http://manuals.lddb.com/LD_Players/Pioneer/CLD/CLD-1400/CLD-1400_EN-FR-ES-Service-Manual_Scan.pdfMaybe Kurtis can also provide input on it as well. Once you get it fixed (I'm sure you will), try not to mess with gearing in the future especially when it comes to belt replacement. You should be able to access the loading belt by ejecting the tray and with the cover off.
|
|
|
|
|
cplusplus
|
Post subject: Re: Pioneer CLD-1070 Tray Issues Posted: 15 Nov 2018, 08:21 |
Hardcore fan |
|
|
Joined: 13 Aug 2018, 03:18 Posts: 1520 Has thanked: 449 times Been thanked: 588 times
|
I'll see if I can get a better view and possibly a video of the skipping. It does not recognize the CD at all. I've tried multiple retail albums. Kurtis mentioned a spindle centering issue here that I need to look into: Some audio cds won't play on my Pioneer CLD-1750
|
|
|
|
|
cplusplus
|
Post subject: Re: Pioneer CLD-1070 Tray Issues Posted: 16 Nov 2018, 05:18 |
Hardcore fan |
|
|
Joined: 13 Aug 2018, 03:18 Posts: 1520 Has thanked: 449 times Been thanked: 588 times
|
I began adjusting spindle centering blindly since I do not have an oscilliscope. I should probably go ahead and grab the holy trinity of oscilliscope, test disc (GGV1002 doesn't appear to be available anymore), and service remote since I like tinkering with these. (At the very least I can pretend I'm an EE ). There was adhesive keeping the shaft adjustment lever in place that I had to remove. It seemed to "shatter" upon adjustment, but this was easily picked up by a cotton swap with a bit of silicone grease on the end. CDs will now spin up a little then stop which is progress. It seems LDs now take a longer to start being read by the laser though.
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|