It is currently 22 Jul 2019, 08:26




 Page 1 of 1 [ 3 posts ] 
Author Message
 Post subject: [DVL-909] Loading Motor Problems
PostPosted: 06 Apr 2019, 05:17 
Knows how to post
Knows how to post
User avatar

Joined: 26 Mar 2019, 01:28
Posts: 8
Location: New Zealand
Has thanked: 1 time
Been thanked: 2 times
I have the situation with my DVL 909 where the loading motor is only turning anticlockwise regardless of whether I press LD or PLAY buttons repeatably.
I suspect that it may be linked to switches S101,S102 or S103,operated by the cam gear switching mechanism, on motor loading pc board LMSB,Part No.
VWG1554.
Because it is so difficult to access is there any way to electrically and physically check the switches out, along with the cam operated switching mechanism, without having to dismantle the player, just about completely.
The exploded diagrams of the mechanism in the service manual really are not much help.
If the worst comes to the worst, and I have to extensively dismantle the player, please can some knowledgeable person tell me how to go about it.
It would be very much appreciated.
Offline
 Profile  
 
 Post subject: Re: [DVL-909] Loading Motor Problems
PostPosted: 02 Jul 2019, 18:59 
Genuinely interested
Genuinely interested
User avatar

Joined: 03 Mar 2019, 15:15
Posts: 32
Location: United Kingdom
Has thanked: 3 times
Been thanked: 7 times
framal wrote:
I have the situation with my DVL 909 where the loading motor is only turning anticlockwise regardless of whether I press LD or PLAY buttons repeatably.
I suspect that it may be linked to switches S101,S102 or S103,operated by the cam gear switching mechanism, on motor loading pc board LMSB,Part No.
VWG1554.
Because it is so difficult to access is there any way to electrically and physically check the switches out, along with the cam operated switching mechanism, without having to dismantle the player, just about completely.
The exploded diagrams of the mechanism in the service manual really are not much help.
If the worst comes to the worst, and I have to extensively dismantle the player, please can some knowledgeable person tell me how to go about it.
It would be very much appreciated.

I don't know if it's any help, but there's a useful guide to dismantling a 909 in this thread:
https://forum.lddb.com/viewtopic.php?f=55&t=8356
Offline
 Profile  
 
 Post subject: Re: [DVL-909] Loading Motor Problems
PostPosted: 02 Jul 2019, 19:50 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 5638
Location: United States
Has thanked: 68 times
Been thanked: 100 times
framal wrote:
I have the situation with my DVL 909 where the loading motor is only turning anticlockwise regardless of whether I press LD or PLAY buttons repeatably.



When you put a disc in it will spin??? Or just freely with your fingers????

Are you sure that the laser is on side A not stuck in side B?
Did you get this player working and now its broken or was it broken and now you are trying to fix it from scratch???

I don't think there is any reason to field strip the player, and I've never heard or seen any techs doing such.

You need to figure out what it is or isn't doing then fix those problems.

What happens when you insert a disc?
You know that these are not like records and on this player the laser should be on the bottom and you place the disc on the tray with side
A up.
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 3 posts ] 


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: