It is currently 21 Jul 2019, 11:30




 Page 1 of 1 [ 3 posts ] 
Author Message
 Post subject: Pioneer CLD-V2600 tray wont open
PostPosted: 25 Jun 2019, 06:31 
Second post
Second post
User avatar

Joined: 25 Jun 2019, 06:21
Posts: 2
Location: United States
Has thanked: 0 time
Been thanked: 0 time
I have a CLD-V2600 in my collection. It will read disc's both CD's and LD's, but the tray will not open. When I press eject, the laser head moves to where the center of the Laserdisc would be, the laser head bracket will tilt just slightly, then I hear a hum noise and the tray wont budge. It times out after awhile with error code. Its acting like the belts are slipping. I have a pdf of the pioneer repair manual, I cant seem to figure out how to manually open the tray.
Offline
 Profile  
 
 Post subject: Re: Pioneer CLD-V2600 tray wont open
PostPosted: 26 Jun 2019, 21:21 
Advanced fan
Advanced fan
User avatar

Joined: 21 Dec 2002, 18:44
Posts: 796
Has thanked: 0 time
Been thanked: 37 times
addablestone13 wrote:
I have a CLD-V2600 in my collection. It will read disc's both CD's and LD's, but the tray will not open. When I press eject, the laser head moves to where the center of the Laserdisc would be, the laser head bracket will tilt just slightly, then I hear a hum noise and the tray wont budge. It times out after awhile with error code. Its acting like the belts are slipping. I have a pdf of the pioneer repair manual, I cant seem to figure out how to manually open the tray.


When you take the bonnet off, on the right side of the player, about 1/3 of the way from from front to back, there should be a pulley with a belt on it. Manually spinning this with your finger will lift the player assembly up to clamp the disc. Moving it the other way will open the drawer. Once the drawer starts to move, you can pull it out the rest of the way on your own. If the laser pickup is close to the spindle motor, it will only open the CD drawer. Move the pickup about mid-way through it's travel and the LD drawer will open.
Offline
 Profile  
 
 Post subject: Re: Pioneer CLD-V2600 tray wont open
PostPosted: 09 Jul 2019, 06:14 
Second post
Second post
User avatar

Joined: 25 Jun 2019, 06:21
Posts: 2
Location: United States
Has thanked: 0 time
Been thanked: 0 time
One thing I noticed is the spindle motor stays up and doesn't move up or down so the disc is always "clamped", the laser bracket will tilt.


blam1 wrote:
addablestone13 wrote:
I have a CLD-V2600 in my collection. It will read disc's both CD's and LD's, but the tray will not open. When I press eject, the laser head moves to where the center of the Laserdisc would be, the laser head bracket will tilt just slightly, then I hear a hum noise and the tray wont budge. It times out after awhile with error code. Its acting like the belts are slipping. I have a pdf of the pioneer repair manual, I cant seem to figure out how to manually open the tray.


When you take the bonnet off, on the right side of the player, about 1/3 of the way from from front to back, there should be a pulley with a belt on it. Manually spinning this with your finger will lift the player assembly up to clamp the disc. Moving it the other way will open the drawer. Once the drawer starts to move, you can pull it out the rest of the way on your own. If the laser pickup is close to the spindle motor, it will only open the CD drawer. Move the pickup about mid-way through it's travel and the LD drawer will open.
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 3 posts ] 


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: