|
It is currently 28 Apr 2024, 13:22
|
View unsolved topics | View unanswered posts
|
|
|
|
aman16
|
Post subject: Re: Help to replace belt on Pioneer CLD-515 - Cannot open tr Posted: 04 Jan 2020, 19:45 |
Knows how to post |
|
|
Joined: 15 Oct 2015, 11:53 Posts: 10 Location: United Kingdom Has thanked: 9 times Been thanked: 0 time
|
Hi Thank you all once again for your help. I've looked at the youtube video at the bit where it showed that if you manually turn the laser in the correct position then it should lower and then you can turn the pulley clockwise to open the tray. I took the lid off the laserdisc play and switched it on and the laser seems to move in the possition which it shows in the video and then the motor noise starts kicking in and nothing else happens because of the broken belt. It then displays the U1 code and then eventually an L1 code. After this I did the following: 1) I turned the pulley clockwise and then the CD tray opened instead. I turn it anti-clockwise and the CD tray closes and then I cannot turn the pulley anymore as there seems to be resistance 2) I tried to manually turn the laser using the white rail screw thing as shown in the video but it seems to just let me keep turning it and it goes further back than shown in the video. I stopped turning just in case it broke something. Should I keep turning this to make the laser go even further back? 3) I looked behind the pulley and noticed a which piece but it seems stuck and applying some force doesnt move anything. Am I supposed to push and turn the pulley clockwise at the same time? Apologies if this all sounds confusing but I am new at this and there isn't anywhere around me that repairs laserdiscs or any vintage equipment anymore. I've taken some photos but I cannot seem to attach more than one file on a reply so I have posted them as seperate replies. Apologies if this the wrong way to do this. Thank you once again for your help so far, much appreciated
Attachments: |
imgonline-com-ua-CompressToSize-If5BSRqzY3qp.jpg [ 133.11 KiB | Viewed 5024 times ]
|
|
|
|
|
|
aman16
|
Post subject: Re: [CLD-515] Help to replace belt - Cannot open tray Posted: 26 Jan 2020, 19:55 |
Knows how to post |
|
|
Joined: 15 Oct 2015, 11:53 Posts: 10 Location: United Kingdom Has thanked: 9 times Been thanked: 0 time
|
Hi Apologies for the delay in replying with an update. I have only just managed to open up the player today and have taken the advice about using my other hand to help lift the mechanisim whilst turning the pulley anti-clockwise and it worked! I then turned the worm screw on the laser assembly to get it into the lasrerdisc position and then pushed the white table then mechanism came doown into the laserdisc position. I then turned the pulley clockwise and this time the whole laserdisc tray opened like it should. Then opened it fully, released the tabs either side of the tray and removed the whole tray out. I then replaced the belt, inserted the tray, switched the player on and I now have a fully working laserdisc player and its all thanks to you guys who replied on this thread. I can't thank you enough For anyone else who is having the same problem, please follow this thread for the solution. Is there any way I can mark this thread as solved so that other can find it easily? Thank you once again!!!
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|