It is currently 06 Aug 2020, 13:44




 Page 1 of 3 [ 53 posts ]  Go to page 1, 2, 3  Next
Author Message
 Post subject: [CLD-D925] E0 Error
PostPosted: 22 Apr 2020, 22:02 
True fan
True fan
User avatar

Joined: 16 Nov 2018, 14:21
Posts: 421
Location: Ireland
Has thanked: 69 times
Been thanked: 48 times
Argh!

I played a warped disc without realising it and it caused an awful noise. I turned off the LD player immediately and tried later to eject the disc.

It does nothing now. Just gives an E0 error.

I opened the lid. The laser at the.back looks like its halfway, is that right? It doesn't move. The disc is clamped tight.

Any ideas what to do? Gutted right now.

Heres what it looks like.

Image
Offline
 Profile  
 
 Post subject: Re: CLD D925 E0 Error
PostPosted: 22 Apr 2020, 22:11 
True fan
True fan
User avatar

Joined: 13 Aug 2018, 03:18
Posts: 375
Has thanked: 79 times
Been thanked: 84 times
I'm wondering if the disc hit the pickup and broke the M-Holder?

Try turning the white worm gear to move the pickup towards the spindle motor.
Offline
 Profile  
 
 Post subject: Re: CLD D925 E0 Error
PostPosted: 22 Apr 2020, 22:15 
True fan
True fan
User avatar

Joined: 16 Nov 2018, 14:21
Posts: 421
Location: Ireland
Has thanked: 69 times
Been thanked: 48 times
I havent a clue what im looking at tbh.

I cant seem to move anything anyway. The metal thing that is like a seesaw moves a bit though.
Offline
 Profile  
 
 Post subject: Re: CLD D925 E0 Error
PostPosted: 22 Apr 2020, 22:20 
Absolute fan
Absolute fan
User avatar

Joined: 24 Jun 2010, 10:23
Posts: 1629
Location: Sweden
Has thanked: 6 times
Been thanked: 50 times
I had this happen once on a CLD-D505. The silver chassis right above the pickup had a dent and simply made it stuck. Don't remember all the detail but I managed to bend it back and had to wiggle on the gear with the drive belt (under the disc tray) to get it [the pickup] back in place.


Last edited by nissling on 22 Apr 2020, 22:21, edited 1 time in total.
Offline
 Profile  
 
 Post subject: Re: CLD D925 E0 Error
PostPosted: 22 Apr 2020, 22:20 
True fan
True fan
User avatar

Joined: 16 Nov 2018, 14:21
Posts: 421
Location: Ireland
Has thanked: 69 times
Been thanked: 48 times
Doubt this helps but here are more photos.

Image

Image
Offline
 Profile  
 
 Post subject: Re: CLD D925 E0 Error
PostPosted: 22 Apr 2020, 22:24 
True fan
True fan
User avatar

Joined: 16 Nov 2018, 14:21
Posts: 421
Location: Ireland
Has thanked: 69 times
Been thanked: 48 times
Okay. Progress. I tapped the laser thing with my finger. Very slightly by accident. Looks like it tapped it back.

Now the laser thing is moving. Like its trying to.get somewhere. But.its stuck and.just.moves the same tiny amount back and forth. Then E0 error appears.
Offline
 Profile  
 
 Post subject: Re: CLD D925 E0 Error
PostPosted: 22 Apr 2020, 22:32 
True fan
True fan
User avatar

Joined: 13 Aug 2018, 03:18
Posts: 375
Has thanked: 79 times
Been thanked: 84 times
Do you hear the motor running, but there is no movement?
Offline
 Profile  
 
 Post subject: Re: CLD D925 E0 Error
PostPosted: 22 Apr 2020, 22:34 
True fan
True fan
User avatar

Joined: 16 Nov 2018, 14:21
Posts: 421
Location: Ireland
Has thanked: 69 times
Been thanked: 48 times
here's a video, with audio, of the problem. I hope its an easy fix.

https://imgur.com/a/6PjBpHf
Offline
 Profile  
 
 Post subject: Re: [CLD-D925] E0 Error
PostPosted: 23 Apr 2020, 22:57 
True fan
True fan
User avatar

Joined: 13 Aug 2018, 03:18
Posts: 375
Has thanked: 79 times
Been thanked: 84 times
Remove the plastic notch on the back of the chassis to see if you can get a better look. I can't tell what (if anything) is getting caught here. The pickup is bouncing back and forth right about where the mechanism tilts up/down on the side change.

For reference: https://youtu.be/t34dj8m1UGw?t=142
Offline
 Profile  
 
 Post subject: Re: [CLD-D925] E0 Error
PostPosted: 23 Apr 2020, 23:01 
True fan
True fan
User avatar

Joined: 16 Nov 2018, 14:21
Posts: 421
Location: Ireland
Has thanked: 69 times
Been thanked: 48 times
Not sure if this helps. Just took another video with the back plastic part removed. Quicker than taking the cover off.

https://imgur.com/a/k2aoT3X
Offline
 Profile  
 
 Post subject: Re: [CLD-D925] E0 Error
PostPosted: 23 Apr 2020, 23:54 
Hardcore fan
Hardcore fan
User avatar

Joined: 10 May 2007, 03:12
Posts: 1261
Location: United States
Has thanked: 0 time
Been thanked: 114 times
Since the laser is in the back you should be able to unplug the unit, take the cover off, and then turn the load gear to drop the laser assembly and have the tray come out. Then you would need to reach in and manually turn the worm wheel on the laser movement motor and assist it in turning out on the bottom. Could not tell if you have the gray or black MHolder but it you have the gray one the mounting pins could be broke and the gears are jamming. Hard to tell what the issue is until you get the tray out so you can really inspect the unit.
Offline
 Profile  
 
 Post subject: Re: [CLD-D925] E0 Error
PostPosted: 24 Apr 2020, 01:10 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 6572
Location: United States
Has thanked: 334 times
Been thanked: 278 times
Have you actually removed the LD yet?
I would be doing that first then try to see what you botched.

And how bad was the warped disc? I want a pic of that.
Offline
 Profile  
 
 Post subject: Re: [CLD-D925] E0 Error
PostPosted: 24 Apr 2020, 08:48 
True fan
True fan
User avatar

Joined: 16 Nov 2018, 14:21
Posts: 421
Location: Ireland
Has thanked: 69 times
Been thanked: 48 times
I don't know how to remove it. It's clamped.

I don't know what I am doing so do not want to force anything and break it.
Offline
 Profile  
 
 Post subject: Re: [CLD-D925] E0 Error
PostPosted: 24 Apr 2020, 15:36 
Jedi Master
Jedi Master
User avatar

Joined: 03 May 2004, 19:05
Posts: 6572
Location: United States
Has thanked: 334 times
Been thanked: 278 times
teddanson wrote:
I don't know how to remove it. It's clamped.

I don't know what I am doing so do not want to force anything and break it.


That will fix all your problems.
Remove the 4 screws and remove that top bracket and pop out comes the LD.
Do this at your own risk and then your player will work again.
Offline
 Profile  
 
 Post subject: Re: [CLD-D925] E0 Error
PostPosted: 24 Apr 2020, 16:47 
True fan
True fan
User avatar

Joined: 16 Nov 2018, 14:21
Posts: 421
Location: Ireland
Has thanked: 69 times
Been thanked: 48 times
Do the screws for the top clamp have a specific torque? Should the disc just fall away or is it clamped in tight mechanically in some way?

If I remove the disc, that should allow the laser then to freely move? Why isn't it just resetting it's position? Does the LD think it's playing a disc when it's switched on because the disc is currently clamped, thus it's getting confused as to what to do which is why it's stuck?

I'll give it a go tonight if I'm feeling brave. Hopefully this is the fix. Thank you for the tip! :thumbup:
Offline
 Profile  
 
 Post subject: Re: [CLD-D925] E0 Error
PostPosted: 24 Apr 2020, 19:54 
True fan
True fan
User avatar

Joined: 16 Nov 2018, 14:21
Posts: 421
Location: Ireland
Has thanked: 69 times
Been thanked: 48 times
OK so I unscrewed the top bracket and sure enough I was able to remove the disc. Thanks for the tip!

The laser unit still struggled though and would not move. I gave it a nudge with my screwdriver and it moved down a small way and stopped.

I nudged it again and the laser unit returned all the.way to the front of the player (bottom part of the player) but it trundled along VERY slowly to get there.

Now at power on I still get an E0 error but apart from the metal bracket thing moving up and down, the laser unit never moves or makes a sound.
Offline
 Profile  
 
 Post subject: Re: [CLD-D925] E0 Error
PostPosted: 25 Apr 2020, 15:14 
True fan
True fan
User avatar

Joined: 13 Aug 2018, 03:18
Posts: 375
Has thanked: 79 times
Been thanked: 84 times
Facing the unit, on the back right of the turn guide there is a spring running vertically. At the bottom it is connected to a switch. Toggle this. It should be moved towards the front.
Offline
 Profile  
 
 Post subject: Re: [CLD-D925] E0 Error
PostPosted: 25 Apr 2020, 15:23 
True fan
True fan
User avatar

Joined: 16 Nov 2018, 14:21
Posts: 421
Location: Ireland
Has thanked: 69 times
Been thanked: 48 times
Thanks I will try that. Excuse ignorance but whats the turn guide? Is that the plastic rail at the back to move the laser up and down between sides?

Do I need the whole cover off or just the back plastic protection part?
Offline
 Profile  
 
 Post subject: Re: [CLD-D925] E0 Error
PostPosted: 25 Apr 2020, 15:54 
True fan
True fan
User avatar

Joined: 13 Aug 2018, 03:18
Posts: 375
Has thanked: 79 times
Been thanked: 84 times
The curved white plastic piece the pickup traverses during the side change. You can't see it in the attached photo, but it is in the area circled in red.

You shouldn't need any further disassembly. It is probably easier to see it and toggle it from the top though.


Attachments:
CLD-D925_Lever_Location.jpg
CLD-D925_Lever_Location.jpg [ 61.96 KiB | Viewed 399 times ]
Offline
 Profile  
 
 Post subject: Re: [CLD-D925] E0 Error
PostPosted: 25 Apr 2020, 20:03 
True fan
True fan
User avatar

Joined: 16 Nov 2018, 14:21
Posts: 421
Location: Ireland
Has thanked: 69 times
Been thanked: 48 times
Thanks for that. I found the spring and slid it forward, sure enough the laser sped back to the middle, and im now back to square one the other night.

It looks like it just has trouble getting past halfway up the M mount thing. I can't see of here anything broken though.
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 3 [ 53 posts ]  Go to page 1, 2, 3  Next


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: