|
It is currently 28 Apr 2024, 13:12
|
View unsolved topics | View unanswered posts
|
|
|
|
Author |
Message |
teddanson
|
Post subject: [CLD-D925] E0 Error Posted: 22 Apr 2020, 22:02 |
Absolute fan |
|
|
Joined: 16 Nov 2018, 14:21 Posts: 1570 Location: New Delaware Has thanked: 448 times Been thanked: 496 times
|
Argh! I played a warped disc without realising it and it caused an awful noise. I turned off the LD player immediately and tried later to eject the disc. It does nothing now. Just gives an E0 error. I opened the lid. The laser at the.back looks like its halfway, is that right? It doesn't move. The disc is clamped tight. Any ideas what to do? Gutted right now. Heres what it looks like.
_________________ Blog: The Coterie / L'boxd: Diary Pioneer CLD-R7G, CLD-D925 | Yamaha APD-2 | DVDO Edge, VP50 Pro
|
|
|
|
|
cplusplus
|
Post subject: Re: [CLD-D925] E0 Error Posted: 23 Apr 2020, 22:57 |
Hardcore fan |
|
|
Joined: 13 Aug 2018, 03:18 Posts: 1520 Has thanked: 449 times Been thanked: 588 times
|
Remove the plastic notch on the back of the chassis to see if you can get a better look. I can't tell what (if anything) is getting caught here. The pickup is bouncing back and forth right about where the mechanism tilts up/down on the side change. For reference: https://youtu.be/t34dj8m1UGw?t=142
|
|
|
|
|
rein-o
|
Post subject: Re: [CLD-D925] E0 Error Posted: 24 Apr 2020, 15:36 |
Jedi Master |
|
|
Joined: 03 May 2004, 19:05 Posts: 8108 Location: Dullaware Has thanked: 1221 times Been thanked: 846 times
|
teddanson wrote: I don't know how to remove it. It's clamped.
I don't know what I am doing so do not want to force anything and break it. That will fix all your problems. Remove the 4 screws and remove that top bracket and pop out comes the LD. Do this at your own risk and then your player will work again.
|
|
|
|
|
teddanson
|
Post subject: Re: [CLD-D925] E0 Error Posted: 24 Apr 2020, 16:47 |
Absolute fan |
|
|
Joined: 16 Nov 2018, 14:21 Posts: 1570 Location: New Delaware Has thanked: 448 times Been thanked: 496 times
|
Do the screws for the top clamp have a specific torque? Should the disc just fall away or is it clamped in tight mechanically in some way? If I remove the disc, that should allow the laser then to freely move? Why isn't it just resetting it's position? Does the LD think it's playing a disc when it's switched on because the disc is currently clamped, thus it's getting confused as to what to do which is why it's stuck? I'll give it a go tonight if I'm feeling brave. Hopefully this is the fix. Thank you for the tip!
_________________ Blog: The Coterie / L'boxd: Diary Pioneer CLD-R7G, CLD-D925 | Yamaha APD-2 | DVDO Edge, VP50 Pro
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|