|
It is currently 24 Apr 2024, 12:17
|
View unsolved topics | View unanswered posts
|
|
|
|
Author |
Message |
wimk
|
Post subject: Denon LA-2300 -->Sony SDP-EP9ES --> Onkyo TX-SR252 Posted: 01 Jun 2020, 11:55 |
Third post and above |
|
|
Joined: 14 May 2020, 14:41 Posts: 3 Location: Netherlands Has thanked: 2 times Been thanked: 0 time
|
Hi Guys,
My name is Wim, I am from the Netherlands, I was wondering whether I could pick someones brain to help me figure out what issue I am facing and whether there is a fix for it. I am relative new to LD my choice back in the day was CD-I brought to the market by Philips (our local brand) as VCC (Video 2000) and DCC the CD-I standard did not make it. Anyway I bought recently a Denon LA-2300, a Sony SDP-EP9ES and a converter to convert RCA into HDMI as my Samsung TV requires HDMI connections. I have tried to hook all this up to my Onkyo TX-SR252. All seemed pretty straight forward. Now the good news, I have video on the Samsung TV and I have analogue sound on the Onkyo TX-SR252. Now the bad news, I hooked up the AC-3 RF port from the Denon LA-2300 to the Sony SDP-EP9ES and do not get any sound back over the optical link to the Onkyo TX-SR252. (AC-3 RF out of the Denon LA-2300 --> AC3-RF in of the Sony SDP-EP9ES and the Optical out of the Sony SDP-EP9ES --> the Onkyo TX-SR252 Optical in)
I ran the following (amateur) tests:
- I ran the self diagnostics on the Sony SDP-EP9ES no errors detected (AC3+DIGITAL2 during power up), so I ruled out the a malfunctioning Sony SDP-EP9ES.
- When selecting the optical input on the Onkyo TX-SR252 it seems to detect a digital signal, once I switch of the Sony the detected signal is gone. I concluded the optical link between the Sony SDP-EP9ES and the Onkyo TX-SR252 is fine or is anybody aware of incompatibilities between the 2 named boxes?
- I put the AC3-RF output of the Denon LA-2300 to an analogue input on another amplifier as I was hoping to hear some noise from the AC3-RF port but no luck (nothing).
My none tech conclussion is that I do not get a signal from the AC-3 RF port of the Denon LA-2300 (????) or am I barking under the wrong tree?
I hope anyone is able to help me out.
Best regards,
Wim
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|